Exam Center · Lab Workbook

Lab Workbook

Hands-on labs are where the exam's configuration and troubleshooting questions become muscle memory. Work through the ten labs below in order, or jump to the skill you need to practise.

CCNA 200-301 v1.1 10 labs Verified 2026-10-11

Lab index

Each lab is a self-contained page with topology, objectives, a step-by-step task list, and verification commands. Open a lab in a new tab and work alongside it.

#LabWeek / topicKey skillsWhere
1 Basic Router Configuration Week 2 — Networking Today Hostname, passwords, banner, interfaces, saving config Packet Tracer
2 Static Routing Week 3 — Protocols IPv4 addressing, static and default routes, ping/traceroute Packet Tracer
3 VLANs, Trunks & Inter-VLAN Routing Week 5 — Data Link Layer VLAN creation, 802.1Q trunks, router-on-a-stick, SVIs Packet Tracer
4 STP & EtherChannel Week 5 — Data Link Layer Root election, port roles, LACP/PAgP bundles, show etherchannel Packet Tracer
5 OSPF Single-Area Week 6 — Network Layer OSPF neighbours, network statements, DR/BDR, verification Packet Tracer
6 HSRP First-Hop Redundancy Week 6 — Network Layer Virtual IP, priority and preempt, active/standby failover Packet Tracer
7 Wireless Configuration Week 8 — Transport Layer WLC, SSIDs, WPA2, DHCP integration, client association Packet Tracer
8 NAT & PAT Week 9 — Application Layer Static and dynamic NAT, PAT overload, inside/outside interfaces Packet Tracer
9 ACL Configuration Week 10 — Security Fundamentals Standard and extended ACLs, placement, show access-lists Packet Tracer
10 Layer 2 Security Week 10 — Security Fundamentals Port security, DHCP snooping, DAI, BPDU guard Packet Tracer
Note The wireless lab (7) is grouped with the transport-layer week in the course calendar, so its page lives under week-08-transport-layer. Follow the links rather than guessing the folder.

How to practise a lab

  1. Read the objectives first. Know what "done" looks like before you touch a CLI.
  2. Draw the topology. Sketch devices, interfaces, and addresses on paper; it fixes the addressing in memory.
  3. Configure from memory where you can. Peek at the steps only after an attempt; struggle produces recall.
  4. Verify at every layer. Check interface status, addressing, then reachability, then the feature itself.
  5. Break it on purpose. Shut a link, remove a route, or misconfigure a VLAN and watch how the failure appears.
  6. Save and compare. Use show running-config and copy running-config startup-config, then rebuild from scratch a second time.
! A three-command sanity sweep after any change
R1# show ip interface brief
R1# show ip route
R1# ping 192.168.10.1

Skills checklist

Tick a box only when you can do the task from memory and verify it without notes.

Common lab mistakes

Sources & references

  1. Cisco. CCNA (200-301) Exam Topics, Configuration and Troubleshooting. cisco.com.
  2. Cisco. Cisco IOS Configuration Fundamentals Command Reference. cisco.com.
  3. Cisco. Cisco Networking Academy. netacad.com.

Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.