Week 1 · Lesson 9

Main Components of Network — Part 2

Part 1 covered the hosts, the media, and the services. Part 2 covers the devices that sit between them — the switches, routers, access points, and firewalls that actually move and guard the traffic — and the different scales and connections a network can have.

CCNA 200-301 Domain 1.0 Network Fundamentals Verified 2026-10-11
Part 1

What intermediary devices do

An intermediary device moves data between hosts. It does not originate the user’s traffic — it forwards it. Its jobs include:

Definition — intermediary device. Any device positioned on the path between hosts that forwards, filters, or manages their traffic without being the source or destination of it. The four you must know are the switch, the router, the wireless access point, and the firewall.
Part 2

Switch and router — the Layer 2 / Layer 3 pair

The switch and the router are the two devices you will be tested on more than any others. Both forward traffic; they differ in what they look at and how far their reach extends.

Switch (Layer 2)

A switch connects end devices within a single local network. It works at Layer 2 (Data Link) and forwards frames by looking at MAC addresses.

How it decides: the switch builds a MAC address table. When a frame arrives, it learns the sender’s MAC from the source address and remembers which port it came from. When a later frame is addressed to that MAC, the switch sends it out of the correct port only. If the destination MAC is unknown, the switch floods the frame out of every port except the one it arrived on. Broadcast frames are flooded too.

Router (Layer 3)

A router connects different networks together. It works at Layer 3 (Network) and forwards packets by looking at IP addresses. It consults its routing table to decide the best next hop for each destination network.

For a host, the router on its own network is the default gateway: the address a PC sends traffic to whenever the destination is not on the local network. Routers do two things a switch cannot:

The router at the edge of a home or business network usually also performs NAT (network address translation), letting many private hosts share one public IP address.

Switch or router? · select one
PC A PC B Switch one network (MAC, frames) Router PC C Server between networks (IP, packets)

Exam tip. A switch is a Layer 2 device that forwards on MAC addresses and stays inside one network. If two devices are in different networks, a switch cannot connect them — you need a router.
Part 3

Access point, wireless router, and firewall

The remaining intermediaries: the device that puts wireless hosts on the LAN, the single box that bundles several of them, and the one that guards the edge.

Access point and wireless router

A wireless access point (WAP/AP) lets wireless devices join a wired network. It is a bridge between the wired LAN and the radio medium: it speaks IEEE 802.11 (Wi-Fi) to the clients and Ethernet to the switch.

A wireless router is not a new kind of box — it is several devices in one housing. The typical home “router” is really:

Function inside a home wireless routerLayer
Router (connects the home LAN to the ISP)Layer 3
Switch (the four Ethernet LAN ports)Layer 2
Wireless access point (the Wi-Fi)Layer 1–2
Firewall / NAT (the security edge)Layer 3–4+

In a business, these functions are usually split into separate devices so each can be sized, secured, and managed on its own.

Inside a home wireless router · pick a function

Firewall

A firewall filters traffic against a set of security rules. It sits at a boundary — classically the network edge between the trusted internal network and the untrusted Internet. Rules match on things such as source/destination IP address, port, and protocol, and produce a permit or deny decision.

Placement. Intermediary devices form a chain: hosts → switch → router → firewall → Internet. The switch serves the local LAN, the router joins networks, and the firewall guards the boundary between them and the outside world.
Part 4

A home LAN, assembled

Here is every device from Parts 1 and 2 in one small picture. The home wireless router is the multi-function box: it is the router, the switch, the access point, and the firewall all at once.

A home LAN · show wired or wireless
Internet (ISP) Wireless Router router + switch + AP + firewall Desktop PC Printer wired (Ethernet) Laptop Smartphone Smart TV wireless (Wi-Fi)

The desktop PC and printer connect to the router with copper cable; the laptop, phone, and smart TV join over Wi-Fi through the built-in access point. The router forwards everything that is not local to the ISP, and the built-in firewall guards the boundary.

Part 5

Network scale: PAN to WAN

Networks are classified by geographic size. Learn the boundaries:

TypeFull nameScaleExample
PANPersonal Area NetworkA few metres around one person.Phone paired to earbuds by Bluetooth
LANLocal Area NetworkOne building, floor, or office.Home network; one office network
MANMetropolitan Area NetworkA city or metropolitan region.A cable operator’s network across a city
WANWide Area NetworkA country, continent, or the whole world.A company linking offices in many cities
Scale, smallest to largest · pick a type

Two related ideas: a campus network is a group of LANs spread across several buildings on one site, joined by a high-speed backbone; and the Internet itself is the largest WAN — a network of networks.

LANs are typically owned, controlled, and run by one organisation and offer high speed. WANs usually span public or leased infrastructure, are more expensive, and often run at lower speed per link. A router is the device that joins a LAN to a WAN.

Part 6

Internet and enterprise connections

Four technologies connect a home to an ISP, and a business uses higher-capacity links with a service guarantee.

TypeMediumNotes
DSLExisting telephone copper pair.Always-on digital service; speed falls with distance from the provider; typically asymmetric (ADSL — faster downstream).
CableCoaxial cable used for cable TV.Uses the DOCSIS standards; capacity is shared with other subscribers on the same cable segment.
FibreOptical fibre directly to the premises (FTTH/FTTP).Highest speeds, often symmetric (equal up and down); increasingly common.
CellularMobile radio network (4G LTE / 5G).Delivered through a cellular modem or a phone hotspot; useful where no wired service exists.
Home connection types · select one

Each connection needs a modem (or an optical ONT) to translate between the provider’s medium and the home router. A satellite link is a fifth option for remote locations, at higher latency.

A business needs more than a single consumer link. Its main sites are joined by high-capacity, service-guaranteed connections, and its branch offices are linked back to the main site. The common options:

OptionWhat it isTypical use
Optical fibreHigh-bandwidth fibre links, often with redundant paths.Between buildings and to the ISP backbone
Metro EthernetA carrier-provided Ethernet service across a metropolitan area — essentially a provider-built MAN.Connecting a company’s sites and data centres across a city
Dedicated / leased circuitsPoint-to-point links with guaranteed bandwidth (for example T1/T3 in North America, E1/E3 in Europe) or newer carrier services such as MPLS WAN.Predictable, SLA-backed links between major offices
Business broadbandBusiness DSL, cable, or fibre with a service-level agreement and static addressing.Small branches that cannot justify a dedicated circuit
Enterprise topology at a glance. A small business edge usually runs: ISP → edge router → firewall → Layer 2 switch → access points and wired hosts, with an internal file/print server on the LAN. The router terminates the WAN link; the firewall enforces policy; the switch aggregates the local devices.
Exam tip. Match the device to the layer and job: switch = Layer 2, MAC, one LAN; router = Layer 3, IP, between networks; access point = wireless into the LAN; firewall = filter at the edge. For connection type: DSL = phone copper, cable = coax, fibre = light, cellular = mobile radio.
Part 7 · Your turn

Review

Check what you have learned with these review questions.

Review · 6 questions

Sources

Sources & references

  1. Cisco. CCNA (200-301) Exam Topics, Network Fundamentals (network components and topologies). cisco.com.
  2. IEEE. IEEE 802.3 (Ethernet switching) and IEEE 802.11 (Wireless LAN). standards.ieee.org.
  3. CableLabs. DOCSIS Specifications (data over cable). cablelabs.com.
  4. Metro Ethernet Forum (MEF). Carrier Ethernet definitions and services. mef.net.
  5. Braden, R. RFC 1122: Requirements for Internet Hosts — Communication Layers (1989). rfc-editor.org/rfc/rfc1122.

Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.