Internet Connections - Part 1
Every home that reaches the Internet does it through an access network. This lesson explains the two roles that make that happen — the modem and the router — and then walks through each home access technology: cable, DSL, fibre, cellular, and satellite. Understanding the medium explains the speed, the cost, and the reliability you get.
How a home reaches the Internet
A phone, laptop, or smart TV at home talks only to the local area network (LAN) in the house. To reach a web server on the far side of the world, that traffic has to leave the home and cross the access network owned by the Internet Service Provider (ISP). The access network is the physical last mile between your home and the ISP — and the technology used there determines almost everything about the connection: its speed, its latency, and how much it costs.
Whatever the technology, the same three stations are involved:
- The home — the LAN and a gateway device that connects it outward.
- The ISP point of presence (POP) — the provider’s local facility where home connections are concentrated and handed off to the provider’s backbone.
- The Internet — the global network of networks that routes traffic to the destination server.
Traffic leaves the home through a gateway, crosses the provider’s access network to the ISP POP, and is then routed across the Internet to the destination. The gateway does two jobs at once, and the next part takes them apart.
The modem and the router
Two functions must happen for a home to reach the Internet, and beginners often confuse them because a single box in the living room performs both:
Access technologies: cable, DSL, fibre, cellular, satellite
Five home access technologies, five different media. Learn the keyword that identifies each one, because the exam almost always describes the medium rather than naming the service.
| Technology | Medium | Typical speed | Symmetry | Latency | Best for |
|---|---|---|---|---|---|
| Cable | Coax (HFC), DOCSIS | High (shared) | Asymmetric | Low | Homes where cable TV already runs |
| DSL | Twisted-pair phone line | Low–medium | Asymmetric (ADSL) or symmetric (SDSL) | Low | Cheap legacy copper coverage |
| Fibre | Optical fibre (FTTH/FTTP/FTTB, GPON) | Very high | Often symmetric | Very low | New deployments needing speed and upload |
| Cellular | Radio (4G LTE / 5G) | Medium–high (variable) | Usually asymmetric | Low–medium | No wire available; mobile and backup use |
| Satellite | Radio to space (GEO/LEO) | Medium–high | Usually asymmetric | High (GEO) | Remote and rural sites |
Broadband vs dedicated bandwidth
These two terms describe how the bandwidth is contracted, not a specific medium.
Cable and consumer DSL are broadband: you buy a speed tier, not a guaranteed slice. A business leased line (Lesson 6) is dedicated: the bandwidth is yours and does not compete with neighbours. This is why a home “1 Gbps” plan can feel slower at 8 p.m. than a dedicated circuit with a much lower nominal rate.
Symmetric vs asymmetric speed
A connection is symmetric when download and upload speeds are equal, and asymmetric when download is much faster than upload. Move the two sliders to see how a plan reads on the label — and which word applies.
| Term | Meaning | Typical example |
|---|---|---|
| Symmetric | Download and upload speeds are equal. | Fibre (FTTH); SDSL |
| Asymmetric | Download is much faster than upload. | Cable (DOCSIS); ADSL |
Asymmetry exists because the original home use case was consuming content: streaming, browsing, and downloads. But once a home regularly uploads — video calls, cloud backup, home CCTV, or creating content — low upload becomes the bottleneck, and a symmetric fibre plan becomes the better choice.
Sources & references
- Cisco. CCNA (200-301) Exam Topics, Network Fundamentals (network topology architectures and WAN technologies). cisco.com.
- CableLabs. DOCSIS Specifications. cablelabs.com/specifications.
- ITU-T. Recommendation G.984: Gigabit-capable Passive Optical Networks (GPON). itu.int/rec/T-REC-G.984.
- IEEE. IEEE 802.11 Wireless LAN (Wi-Fi). standards.ieee.org.
- Socolofsky, T. & Kale, C. RFC 1180: A TCP/IP Tutorial (1991). rfc-editor.org/rfc/rfc1180.
Review
Check what you have learned with these review questions.
Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.