Week 2 · Lesson 5

Internet Connections - Part 1

Every home that reaches the Internet does it through an access network. This lesson explains the two roles that make that happen — the modem and the router — and then walks through each home access technology: cable, DSL, fibre, cellular, and satellite. Understanding the medium explains the speed, the cost, and the reliability you get.

CCNA 200-301 Domain 1.0 Network Fundamentals Verified 2026-10-11
Part 1

How a home reaches the Internet

A phone, laptop, or smart TV at home talks only to the local area network (LAN) in the house. To reach a web server on the far side of the world, that traffic has to leave the home and cross the access network owned by the Internet Service Provider (ISP). The access network is the physical last mile between your home and the ISP — and the technology used there determines almost everything about the connection: its speed, its latency, and how much it costs.

Whatever the technology, the same three stations are involved:

The journey to the Internet · step through the path
1 / 4
Home PC Modem + Home Router ISP POP Internet Web server LAN access network

Traffic leaves the home through a gateway, crosses the provider’s access network to the ISP POP, and is then routed across the Internet to the destination. The gateway does two jobs at once, and the next part takes them apart.

Part 2

The modem and the router

Two functions must happen for a home to reach the Internet, and beginners often confuse them because a single box in the living room performs both:

Two jobs in one box · select one

Note. In most homes the modem and router are combined into one residential gateway that also includes an Ethernet switch and a wireless access point. But the two jobs are separate, and the exam treats them separately.
Part 3

Access technologies: cable, DSL, fibre, cellular, satellite

Five home access technologies, five different media. Learn the keyword that identifies each one, because the exam almost always describes the medium rather than naming the service.

Access technologies · select one

Exam tip. Match the keyword to the technology: “shared bandwidth” + coaxial + DOCSIS = cable; “telephone line” + distance from the DSLAM = DSL; “light” + often symmetric + GPON = fibre; “high latency” + remote/rural = satellite; “mobile radio” = cellular. If a question asks which needs no wired infrastructure, the answer is cellular or satellite.
TechnologyMediumTypical speedSymmetryLatencyBest for
CableCoax (HFC), DOCSISHigh (shared)AsymmetricLowHomes where cable TV already runs
DSLTwisted-pair phone lineLow–mediumAsymmetric (ADSL) or symmetric (SDSL)LowCheap legacy copper coverage
FibreOptical fibre (FTTH/FTTP/FTTB, GPON)Very highOften symmetricVery lowNew deployments needing speed and upload
CellularRadio (4G LTE / 5G)Medium–high (variable)Usually asymmetricLow–mediumNo wire available; mobile and backup use
SatelliteRadio to space (GEO/LEO)Medium–highUsually asymmetricHigh (GEO)Remote and rural sites
Part 4

Broadband vs dedicated bandwidth

These two terms describe how the bandwidth is contracted, not a specific medium.

Definitions. Broadband is a high-speed, always-on access service sold to many subscribers that shares capacity and is generally best-effort, with no committed bandwidth guarantee. Dedicated bandwidth is capacity reserved exclusively for one customer (a leased line), with a committed rate and typically a service-level agreement.

Cable and consumer DSL are broadband: you buy a speed tier, not a guaranteed slice. A business leased line (Lesson 6) is dedicated: the bandwidth is yours and does not compete with neighbours. This is why a home “1 Gbps” plan can feel slower at 8 p.m. than a dedicated circuit with a much lower nominal rate.

Part 5

Symmetric vs asymmetric speed

A connection is symmetric when download and upload speeds are equal, and asymmetric when download is much faster than upload. Move the two sliders to see how a plan reads on the label — and which word applies.

Symmetric or asymmetric? · set the two rates

Asymmetric500 Mb/s down / 50 Mb/s up

TermMeaningTypical example
SymmetricDownload and upload speeds are equal.Fibre (FTTH); SDSL
AsymmetricDownload is much faster than upload.Cable (DOCSIS); ADSL

Asymmetry exists because the original home use case was consuming content: streaming, browsing, and downloads. But once a home regularly uploads — video calls, cloud backup, home CCTV, or creating content — low upload becomes the bottleneck, and a symmetric fibre plan becomes the better choice.

Part 6

Sources & references

  1. Cisco. CCNA (200-301) Exam Topics, Network Fundamentals (network topology architectures and WAN technologies). cisco.com.
  2. CableLabs. DOCSIS Specifications. cablelabs.com/specifications.
  3. ITU-T. Recommendation G.984: Gigabit-capable Passive Optical Networks (GPON). itu.int/rec/T-REC-G.984.
  4. IEEE. IEEE 802.11 Wireless LAN (Wi-Fi). standards.ieee.org.
  5. Socolofsky, T. & Kale, C. RFC 1180: A TCP/IP Tutorial (1991). rfc-editor.org/rfc/rfc1180.
Part 7 · Your turn

Review

Check what you have learned with these review questions.

Review · 6 questions

Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.