Week 2 · Lesson 9

Network Security

Every network connected to the Internet is under constant, automated attack. Before you can defend anything you must know what you are defending, who is attacking, and the specific ways each attack works. This lesson names the goals, the threats, and the vulnerabilities — the vocabulary the rest of the security weeks build on.

CCNA 200-301 Domain 5.0 Security Fundamentals Verified 2026-10-11
Part 1

Why every connected network needs security

A network gives many people access to the same devices, data, and services. That sharing is the whole point — and it is also the problem. Every service that is reachable by a legitimate user is, by default, reachable by an attacker. Because the Internet never sleeps, this is not a rare event: an unpatched, Internet-facing device is commonly probed by automated scanners within minutes of coming online.

Definition. A threat is any potential danger that could harm the network. A vulnerability is a weakness an attacker can use. An exploit is the specific technique that turns a vulnerability into an attack. Security work means reducing vulnerabilities so that threats cannot be exploited.
The chain, in order. Threat = something that could do harm. Vulnerability = a weakness that allows harm. Exploit = the tool or method that actually delivers the harm. Close a vulnerability and you remove the exploit path, even if the threat still exists.
Part 2

The three security goals

All of security comes down to protecting three properties, remembered as the CIA triad.

Which goal does the attack break? · select the scenario

GoalOne-line meaningExample threat that breaks it
ConfidentialityOnly authorised parties can read the data.An attacker sniffs unencrypted traffic and reads passwords.
IntegrityData is not altered, and any alteration is detected.A man-in-the-middle tampers with a file in transit.
AvailabilitySystems and data are usable when legitimate users need them.A DDoS attack overwhelms a server so no one can reach it.
Exam tip. Remember the acronym CIA. If a question describes data being read by the wrong person, that is confidentiality; data being changed, integrity; a service being knocked offline, availability. A single attack can touch more than one goal at once.
Part 3

Malware: the five types

Malware (malicious software) is any program written to damage, disrupt, or gain unauthorised access to a system. The exam expects the five classic categories.

Malware types · select one

TypeHow it spreadsClassic behaviour
VirusAttaches to a host file or program; spreads when a user runs the infected file.Corrupts or deletes files; needs a user action to propagate.
WormSelf-replicating; copies itself across the network without user action.Exploits a service and floods the network, consuming bandwidth.
Trojan horseDisguised as legitimate software the user chooses to install.Opens a back door or downloads further malware in the background.
SpywareBundled with other software or a malicious site.Secretly records keystrokes, browsing, and credentials.
RansomwareDelivered by phishing, a worm, or an exploit kit.Encrypts the victim’s data and demands payment for the key.
Key distinction. The difference the exam tests most is virus vs worm: a virus needs a human to run the infected file, while a worm spreads by itself across the network. A Trojan relies on the user’s trust; it does not self-replicate at all.
Part 4

Phishing and social engineering

Attackers usually target the weakest link — the person. Social engineering is the use of psychological manipulation to trick people into revealing information or performing an action, such as giving out a password or plugging in a rogue device.

Social engineering · name the technique

Because social engineering bypasses the technology, the best defence is user awareness and training (Week 10 covers this and other security-programme elements).

Part 5

DoS, DDoS and botnets

A denial-of-service (DoS) attack floods a target with so much traffic or so many requests that legitimate users cannot be served. A distributed denial-of-service (DDoS) attack does the same thing from many sources at once, which is far harder to block because the traffic comes from many different addresses.

The many sources in a DDoS are usually a botnet: a large set of compromised machines (each one called a bot or zombie) that the attacker controls remotely. Botnets are also rented out to send spam and spread malware. Attackers who provide DDoS “as a service” do so because a wider attack is harder to filter.

DoS or DDoS? · set the number of sources

Watch the wording. DoS = one source. DDoS = many distributed sources. If an exam option mentions hundreds of hosts or a botnet, the answer is DDoS.
Part 6

Brute force and theft

These attacks almost always begin with a stolen or guessed credential, which is why strong passwords and multi-factor authentication are described as the first line of defence (Week 10).

Part 7

Vulnerabilities

Attacks are only possible because of weaknesses. The most common ones are boringly predictable — and that is exactly why they are worth memorising.

VulnerabilityExampleFix
Weak or default passwordsAn unchanged admin/admin or cisco/cisco is an open door.Set strong unique credentials, use enable secret, and enable multi-factor authentication.
Unpatched softwareKnown bugs the vendor already fixed stay exploitable until the fix is installed.Install security updates on a schedule and prioritise internet-facing systems.
Unencrypted trafficClear-text protocols such as Telnet and HTTP.Use SSH, HTTPS, and IPsec for anything that crosses an untrusted network.
MisconfigurationOpen ports, exposed management interfaces, permissive rules.Apply secure baselines, remove unused services, and review rules regularly.
Lack of user trainingPeople who cannot spot a phishing email defeat every technical control.Run regular awareness training and phishing simulations.
Physical accessIf an attacker can touch the device, almost nothing else matters.Lock server rooms and cabinets, use console and cable locks, and log entry.
Part 8

Layers and the threat surface

Networks are built in layers, and every layer adds its own way in. The threat surface (also called the attack surface) is the total set of points where an attacker could try to enter or extract data: every open port, every running service, every user account, every wireless signal, and every device — including the physical ones.

A larger network has a larger threat surface. A single home router has a handful of services exposed; an enterprise campus has thousands of ports, accounts, and devices. Security is therefore a matter of reducing and monitoring the surface, layer by layer, rather than guarding one chokepoint. That layered idea becomes defense in depth, the subject of the next lesson.

Internet attackers Firewall Router Switch PC Server inspects & blocks malicious traffic

Every device, service, and user is a possible point of entry. A firewall at the edge shrinks the threat surface, but it is only one layer — an attacker who gets past it, or a malicious insider, still faces the internal defences described in the next lesson. The exposure at each layer is different: the network layer hides behind open ports and unencrypted traffic, the host layer behind running services and local accounts, the application layer behind weak authentication and exposed APIs, and the physical layer behind the devices and the rooms they live in.

Attack summary

AttackCategoryMain targetExample mitigation
VirusMalwareHost files & applicationsAntivirus, patching, user awareness
WormMalwareNetwork servicesPatching, firewalls, network segmentation
Trojan horseMalwareUser trust / the hostEndpoint protection; avoid untrusted downloads
SpywareMalwareCredentials & privacyAnti-malware, patching, least-privilege
RansomwareMalwareData and filesOffline backups, endpoint protection, patching
Phishing / social engineeringHuman manipulationUsers’ credentialsEmail filtering, user training, MFA
DoSAvailability attackA single service or hostRate limiting, IPS, upstream filtering
DDoS (via botnet)Availability attackService or whole networkDDoS scrubbing, ISP/CDN filtering
Brute forceCredential attackAuthenticationStrong passwords, lockout, MFA
Data theftData breachSensitive dataEncryption, access control, monitoring
Identity theftData breachPersonal identityMFA, monitoring, user awareness

Week 10 deepens the mitigations for every row: AAA, patching, and device hardening are covered in full there.

Part 9 · Your turn

Review

Check what you have learned with these review questions.

Review · 6 questions

Sources

Sources & references

  1. Cisco. CCNA (200-301) Exam Topics, Domain 5.0 Security Fundamentals (5.1–5.2). cisco.com.
  2. NIST. SP 800-12 Rev. 1: An Introduction to Information Security (2017) — the CIA triad and the threat/vulnerability/exploit vocabulary. csrc.nist.gov.
  3. NIST. SP 800-30 Rev. 1: Guide for Conducting Risk Assessments (2012). csrc.nist.gov.
  4. Cisco. What Is Malware? Cisco Security glossary. cisco.com.

Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.