Copper Cabling
Most network drops in the world are copper. To specify, install, or troubleshoot them you need three things cold: what limits copper, the category that reaches a given speed at a given distance, and the 100 m channel rule. The numbers in this lesson are the ones the exam expects — learn them exactly.
Why copper?
Copper is inexpensive, easy to terminate, and — crucially — it conducts electricity, so it can carry data as electrical signals. A changing voltage on a copper pair represents the bits from the previous lesson. Copper is the default medium for horizontal cabling inside buildings because it is cheap to install and, thanks to Power over Ethernet (PoE), can even deliver electrical power to phones, cameras and access points over the same cable that carries data.
The signal
Electrical voltage variations on a copper pair. One differential pair carries one signal.
Where it lives
The horizontal run inside a building, from the patch panel to the wall jack. Almost every office drop is copper.
The bonus
PoE rides the same cable, so a ceiling access point or desk phone needs no mains socket.
There are three families of copper media. Learn the one-line distinction now; the two twisted-pair types are expanded in Lesson 4.
| Media | One-line description |
|---|---|
| UTP — unshielded twisted pair | Four twisted pairs in an outer jacket, no extra shield; the most common LAN cabling. |
| STP — shielded twisted pair | Twisted pairs with a foil/braid shield to resist EMI; better noise immunity, heavier and costlier. |
| Coaxial | A single centre conductor surrounded by a mesh shield; legacy for Ethernet, now used for cable broadband and video. |
What limits copper
Copper is not perfect. Three effects cap how far and how fast a copper link can run.
The signal grows weaker with distance as resistance and capacitance sap energy from the line. This is the fundamental reason for a maximum cable length.
External electrical fields — motors, fluorescent lights, power cables, radio transmitters — induce noise onto the copper pairs and corrupt the signal.
Crosstalk is signal from one pair coupling into a neighbouring pair inside the same cable. Twisting the pairs is the primary defence: the more twists per unit length, the more evenly the interference cancels. Crosstalk comes in three named forms, and the exam expects the terms.
| Term | What it means |
|---|---|
| NEXT (near-end crosstalk) | Crosstalk measured at the same end as the transmitting pair. |
| FEXT (far-end crosstalk) | Crosstalk measured at the far end of the cable, away from the transmitter. |
| Alien crosstalk (AXT) | Crosstalk coupled between separate, adjacent cables in a bundle — the effect Cat6a is engineered to control. |
UTP categories (canonical values)
Twisted-pair copper is rated by category. The category sets the guaranteed bandwidth (in MHz), the maximum speed, and the distance at that speed. These are the canonical figures — memorise the table.
| Category | Bandwidth | Max speed | Max distance | Typical use |
|---|---|---|---|---|
| Cat5e | 100 MHz | 1 Gbps | 100 m | Home and small-office gigabit |
| Cat6 | 250 MHz | 1 Gbps; 10 Gbps at up to ~55 m | 100 m (1 Gbps); ~55 m (10 Gbps) | Office; short 10G runs |
| Cat6a | 500 MHz | 10 Gbps | 100 m | Enterprise / data-centre 10G |
| Cat7 | 600 MHz | 10 Gbps | ~100 m | ISO-only (Class F), fully shielded; not a TIA category |
| Cat8 | 2000 MHz | 25 / 40 Gbps | ~30 m | Data-centre switch-to-server only |
The 100 m channel rule
For Ethernet over twisted-pair copper, the maximum channel length is 100 metres (about 328 ft). This is not a round number chosen for convenience: it is the distance over which the signal can survive attenuation and still be decoded. The 100 m is divided as:
- 90 m — the permanent link: the solid horizontal cable run from the patch panel to the wall jack.
- 10 m — the total of the patch cords at both ends (the stranded cables from the switch to the panel, and from the jack to the device).
So a “100 m” run is really 90 m of installed cable plus up to 10 m of patch leads. Running copper beyond 100 m causes attenuation to win over signal and the link to fail or error — the reason fibre takes over for longer spans (Lesson 5).
The RJ-45 connector and the three patch cords
Twisted-pair Ethernet uses the RJ-45 plug, correctly called 8P8C (8 positions, 8 contacts). It terminates all four pairs, which is essential for Gigabit and 10G Ethernet because those standards use every pair simultaneously in both directions. The standard wiring schemes are T568A and T568B; both ends of a normal cable must use the same scheme, and in practice T568B is the most common.
Three wiring patterns cover every copper patch cord you will meet. Learn the one-line purpose of each; Lesson 4 covers the details and when each is used.
| Cable | Wiring | Connects |
|---|---|---|
| Straight-through | Same pinout at both ends (pin 1→1, 2→2, and so on). | Unlike devices, e.g. a PC to a switch. |
| Crossover | Transmit and receive pairs swapped (1↔3, 2↔6). | Like devices, e.g. switch to switch or PC to PC (legacy; Auto-MDI-X now handles it). |
| Rollover | Pin order fully reversed (1↔8, 2↔7, …). | A PC's serial port to a Cisco device's console port for management. |
Legacy coaxial cable and the anatomy of UTP
Early Ethernet ran on coaxial cable, and the two variants are still named on exams:
- Thicknet (
10BASE5) — a stiff, thick coax backbone (sometimes called “yellow cable”) with a maximum segment of about 500 m, using vampire taps and an AUI connector. - Thinnet (
10BASE2) — a thinner, cheaper coax with a maximum segment of about 185 m, using BNC connectors in a bus topology.
Coax has been replaced by twisted pair in LANs, but it survives as the drop cable for cable broadband and for some video/CCTV runs.
A UTP cable holds four twisted pairs. Twisting keeps each pair's signal from coupling into its neighbours (crosstalk). All four pairs terminate in the eight positions of the RJ-45 (8P8C) connector, letting the cable carry Gigabit and 10G Ethernet over four pairs.
Key terms
- Attenuation — loss of signal strength as it travels along a cable.
- EMI — electromagnetic interference; external noise induced onto a cable.
- NEXT — near-end crosstalk; coupling measured at the transmitting end.
- FEXT — far-end crosstalk; coupling measured at the far end.
- Alien crosstalk — coupling between separate adjacent cables.
- UTP — unshielded twisted pair; the common LAN copper cable.
- STP — shielded twisted pair; adds shielding for noisy environments.
- Cat5e — 100 MHz, 1 Gbps at 100 m.
- Cat6 — 250 MHz, 1 Gbps at 100 m; 10 Gbps up to ~55 m.
- Cat6a — 500 MHz, 10 Gbps at 100 m.
- RJ-45 / 8P8C — the eight-position connector used for twisted-pair Ethernet.
- Straight-through cable — patch cord with the same pinout at both ends; links unlike devices.
Review
Check what you have learned with these review questions.
Sources & references
- TIA / ANSI. ANSI/TIA-568.2-D, Balanced Twisted-Pair Telecommunications Cabling and Components Standard (2018) — cable categories, connectors, channel length and Cat8 (2000 MHz, 30 m). tiaonline.org.
- IEEE. IEEE 802.3 — 802.3ab (1000BASE-T), 802.3an (10GBASE-T) and 802.3bz (2.5G/5GBASE-T). standards.ieee.org/ieee/802.3.
- ISO/IEC. ISO/IEC 11801-1:2017, Generic cabling for customer premises (Classes C–F/EA, including Cat7 Class F). iso.org/standard/66182.html.
- Cisco. CCNA (200-301) Exam Topics, Domain 1.6 (physical interfaces and cabling). cisco.com.
Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.