Week 5 · Lesson 6

Network Topology

Topology is the shape of a network — how devices and links are arranged. The word hides two different questions: how the cables physically run, and how frames logically travel at Layer 2. Getting both straight explains why modern switched LANs look like a star but behave like a full mesh.

CCNA 200-301 Domain 1.0 Network Fundamentals Verified 2026-10-11
Part 1

Physical vs logical topology

Topology answers “what shape is the network?” but a network has two shapes at once.

Physical topology = how cables and devices are actually cabled and laid out (the hardware you can see and touch).
Logical topology = how data (frames) actually flows between devices, regardless of the cabling.

These can differ. A building cabled as a star — every desk to a central switch — can behave logically as a full mesh, because the switch can forward any station’s frames to any other station. That mismatch is the whole point of modern LAN design, and we return to it in Part 6.

Part 2

Bus and ring — the legacy shapes

Bus topology

In a bus, all devices tap into one single shared backbone cable. At each end of the cable is a terminator that absorbs signals so they do not reflect back and corrupt traffic. Only one device may transmit at a time, so a bus relies on CSMA/CD.

Ring topology

In a ring, each device connects to exactly two neighbours, forming a closed loop. Frames normally travel in one direction around the ring. Access is usually controlled by token passing, so there are no collisions.

Part 3

Star topology

In a star, every device has its own dedicated link to a central device. In modern LANs that central device is a switch (historically a hub). This is by far the dominant LAN topology today.

Exam tip. If a question asks for the physical topology of a typical modern office LAN, the answer is a star (or a hierarchical extended star of stars). Do not be fooled by older questions that still reference bus Ethernet — that is legacy.
Part 4

Mesh and hybrid topologies

In a mesh, devices are interconnected with redundant links so there are multiple paths between them. A full mesh connects every node to every other node; a partial mesh connects only some pairs.

Real networks combine shapes. A common enterprise design is a hierarchical star (also called an extended star): access switches form stars around distribution switches, which form stars around a core, with mesh links reserved for the core and WAN. This mix captures the manageability of a star and the resilience of a mesh where it matters most. “Hybrid” simply means two or more of the base topologies used together.

Part 5

Comparing topologies

Change the number of devices and count the links each topology needs. This is the widget to come back to when the exam asks “how many cables?”

TopologyFailure impactCabling costExample / status
BusOne break/terminator loss downs the whole segmentLow (single backbone)Legacy 10BASE2/5 coax Ethernet
RingBreak disrupts ring (unless dual-ring)ModerateLegacy Token Ring, FDDI
StarOne cable fault = one host; switch is critical pointHigher (run per device)Modern switched LAN — dominant
MeshVery resilient; reroutes around failuresHighest; n(n−1)/2 linksCore / WAN backbones
HybridDepends on the mix; good if core is meshedMixedEnterprise hierarchical star
Topology explorer
Physical WAN topologies
Physical LAN topologies

Squares are central devices (a Layer 3 device or a switch). Circles are sites or end devices.

Part 6

The logical topology of a switched LAN

Here is the subtlety that exam questions love. A modern LAN is physically a star: every device has a dedicated cable to a switch. But its logical Layer 2 topology is full connectivity — the switch forwards frames from any station to any other station on the VLAN, as if every pair could talk directly. The shared “bus” of the old world becomes a switching fabric that delivers only to the intended destination port.

So when you are asked “what is the logical topology of a switched Ethernet LAN?”, the best answer is any-to-any full connectivity at Layer 2, even though the wiring is a star. The physical shape is what you cable; the logical shape is what the frames experience.

The same LAN, two views · select a view

Part 7

Redundancy, loops, and the STP answer

High availability pushes designers to add redundant links between switches. But Layer 2 Ethernet has no built-in Time To Live (TTL) field the way IP does, so a frame with an unknown destination is flooded out of every port. If there is a loop in the topology, floods circulate forever and multiply. Three failure modes result.

ProblemWhat happensEffect
Broadcast stormBroadcast frames loop endlessly, each copy generating more copies.Saturates links and CPU; the whole LAN stalls.
MAC address flapThe same source MAC appears on two different ports in turn as looped frames arrive.The switch’s MAC table churns; forwarding becomes unstable.
Duplicate framesUnicast frames are delivered more than once via different paths.Applications receive duplicates; upper layers are confused.
Exam tip — the loop solution. A Layer 2 loop is prevented by Spanning Tree Protocol (STP, IEEE 802.1D) and its faster descendants (RSTP, MSTP). STP logically blocks redundant ports so there is exactly one active path, while keeping the redundant links ready to take over if the active path fails. STP is covered in detail in Lessons 18 and 19.

The design lesson: redundancy is good, but at Layer 2 it must be paired with a loop-prevention protocol. Add a redundant link without STP and you have built a broadcast storm waiting to happen.

Remember. A loop is not a topology flaw; it is a cabling choice that becomes a problem only because Ethernet floods and has no TTL. STP restores a loop-free logical topology on top of a physically redundant one.
What a loop does · select the failure mode

Part 8 · Your turn

Review

Check what you have learned with these review questions.

Review · 6 questions

Sources

Sources & references

  1. IEEE. IEEE 802.3 (Ethernet; CSMA/CD and bus/star legacy technologies). standards.ieee.org.
  2. IEEE. IEEE 802.1D (Media Access Control Bridges; defines the Spanning Tree Protocol). standards.ieee.org.
  3. Cisco. CCNA (200-301) Exam Topics, Network Fundamentals. cisco.com.

Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.