IPv4 Special Addresses (3) — Full Reference & IPv6 Special Addresses
This is the single-page reference. First it consolidates every IPv4 special block from Lessons 5–6 into one master table. Then it turns to IPv6 and its own reserved addresses — including the one big idea that IPv6 has no broadcast at all.
Master IPv4 special-address table
Everything from the last two lessons, plus the two forms of the all-zero address, in one place. Every value is canonical; use this table as your revision sheet.
| Block | RFC | Purpose | Routable? |
|---|---|---|---|
| 0.0.0.0/8 | RFC 1122 | “This network” — source only, network number unknown | No |
| 0.0.0.0/0 | RFC 1122 | Default route — matches every destination | Route only |
| 127.0.0.0/8 | RFC 1122 | Loopback (127.0.0.1 = localhost) | No |
| 169.254.0.0/16 | RFC 3927 | Link-local / APIPA (no DHCP) | No |
| 10.0.0.0/8 | RFC 1918 | Private | No |
| 172.16.0.0/12 | RFC 1918 | Private (172.16.0.0 – 172.31.255.255) | No |
| 192.168.0.0/16 | RFC 1918 | Private | No |
| 100.64.0.0/10 | RFC 6598 | Shared address space for CGN | No |
| 192.0.2.0/24 | RFC 5737 | Documentation — TEST-NET-1 | No |
| 198.51.100.0/24 | RFC 5737 | Documentation — TEST-NET-2 | No |
| 203.0.113.0/24 | RFC 5737 | Documentation — TEST-NET-3 | No |
| 224.0.0.0/4 | RFC 1112 | Multicast (224.0.0.0 – 239.255.255.255) | No |
| 240.0.0.0/4 | RFC 1112 | Reserved for future use (240.0.0.0 – 255.255.255.255) | No |
| 255.255.255.255 | RFC 919/922 | Limited broadcast (local subnet) | No |
The “this network” address — 0.0.0.0/8
The first /8 of the whole address space, 0.0.0.0/8, has a special
reading defined in RFC 1122: it means “this network”.
When the network portion of an address is all zeros, it refers to the network the sender is on,
without naming it. A host uses 0.0.0.0/8-style addressing as a source only
when it does not yet know its own network number — the same situation we met with DHCP. It is
never a valid destination.
The related but distinct form is 0.0.0.0/0 — prefix length
zero, mask 0.0.0.0. Because the prefix matches zero bits, it matches every
destination. In a routing table it is the default route: the route used when no
more specific match exists. A home router’s “gateway of last resort” is exactly
this. Remember the split:
0.0.0.0/8— “this network” (a network number of zero).0.0.0.0/0— the default route (matches all destinations).
0.0.0.0 as a source means “this host has no address yet.”
0.0.0.0/0 as a prefix means “the default route.” The mask is what
changes the meaning.IPv6 special addresses
IPv6 addresses are 128 bits, written as eight groups of four hex digits. It has its own set of reserved addresses; most mirror an IPv4 function, but the notation is different. These are the canonical values (RFC 4291 defines the address architecture).
| Prefix | Name | Purpose |
|---|---|---|
| :: | Unspecified | All 128 bits zero. Used as a source before the host has an address; never a destination. The IPv6 equivalent of 0.0.0.0. |
| ::1 | Loopback | The single loopback address. Equivalent to 127.0.0.1; traffic never leaves the host. |
| fe80::/10 | Link-local unicast | Auto-configured on every IPv6 interface (even with no router). Valid only on the local link; never routed. |
| fc00::/7 | Unique local (ULA) | Private-style addressing (RFC 4193). The locally assigned half is fd00::/8, e.g. fd12:3456:789a::. |
| ff00::/8 | Multicast | All IPv6 multicast. There is no broadcast in IPv6. |
| 2001:db8::/32 | Documentation | Reserved for examples and documentation (RFC 3849), like the IPv4 TEST-NET ranges. |
| ::ffff:0:0/96 | IPv4-mapped | Represents an IPv4 address inside IPv6, e.g. ::ffff:192.0.2.1. |
Details worth knowing:
fe80::/10means the first ten bits are fixed (1111 1110 10). The full range isfe80::throughfebf:ffff:...:ffff. Each interface normally forms its link-local address in thefe80::/64prefix and must add a zone identifier (such as%eth0) when you reference it, because it is only meaningful on one link.fc00::/7is unique local. The 8th bit (the L bit) decides the half:fc00::/8is not yet defined, andfd00::/8is locally assigned — the common case. A ULA combines a 40-bit random Global ID with a subnet ID, and is not expected to be globally routable.ff00::/8— multicast. Well-known groups includeff02::1(all nodes on the link) andff02::2(all routers on the link).ff02::1:ff00:0/104is the solicited-node multicast prefix used by Neighbor Discovery.
Why IPv6 has no broadcast
IPv4 has broadcast addresses (the limited broadcast 255.255.255.255 and directed
subnet broadcasts). IPv6 removed broadcast entirely. Two reasons drove the
design:
- Broadcast wastes capacity. A broadcast interrupts every host on the link, even the ones that do not care. On a large IPv6 link, that is a lot of needless work and a classic denial-of-service amplifier.
- Multicast is more precise. IPv6 uses multicast groups so only interested hosts process a packet. Neighbor Discovery, router advertisements, and address configuration all rely on specific multicast groups instead of a catch-all broadcast.
The practical equivalent of an IPv4 broadcast is the all-nodes multicast
ff02::1, but it is opt-in (hosts listen on the group) rather than forced on every
device. IPv6 also uses anycast, where one address is assigned to several devices
and a packet is delivered to the nearest one. The result is a protocol with no broadcast address,
no broadcast traffic, and no directed-broadcast security problem.
ff00::/8) instead.IPv4 vs IPv6 special addresses
Line up the two address families by function. This pairing table is high-yield:
| Function | IPv4 | IPv6 |
|---|---|---|
| Unspecified | 0.0.0.0 | :: |
| Loopback | 127.0.0.0/8 (127.0.0.1) | ::1 |
| Link-local | 169.254.0.0/16 | fe80::/10 |
| Private / unique-local | 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16 | fc00::/7 (fd00::/8) |
| Multicast | 224.0.0.0/4 | ff00::/8 |
| Broadcast | 255.255.255.255 (limited) | None — multicast replaces it |
| Documentation | 192.0.2.0/24, 198.51.100.0/24, 203.0.113.0/24 | 2001:db8::/32 |
| Default route | 0.0.0.0/0 | ::/0 |
Key terms
| Term | Meaning |
|---|---|
| “This network” (0.0.0.0/8) | The first /8; a network number of zero meaning the local network, used only as a source before a host knows its address. |
| Default route | The prefix 0.0.0.0/0 (IPv6: ::/0); matches every destination. |
| Unspecified address (IPv6) | ::; all-zero address, a source before the host has an address. |
| Loopback (IPv6) | ::1; the single loopback address, equivalent to 127.0.0.1. |
| Link-local (IPv6) | fe80::/10; auto-configured per interface, valid only on one link. |
| Unique local (ULA) | fc00::/7 (locally assigned half fd00::/8); private-style IPv6 addressing (RFC 4193). |
| Multicast (IPv6) | ff00::/8; replaces IPv4 broadcast. |
Review
Check what you have learned with these review questions.
Sources & references
- Hinden, R. & Deering, S. RFC 4291: IP Version 6 Addressing Architecture (2006).
Unspecified (
::), loopback (::1), link-local (fe80::/10), multicast (ff00::/8), IPv4-mapped (::ffff:0:0/96). rfc-editor.org/rfc/rfc4291. - Hinden, R. & Haberman, B. RFC 4193: Unique Local IPv6 Unicast Addresses (2005).
fc00::/7. rfc-editor.org/rfc/rfc4193. - Huston, G., Lord, A. & Smith, P. RFC 3849: IPv6 Address Prefix Reserved for
Documentation (2004).
2001:db8::/32. rfc-editor.org/rfc/rfc3849. - Braden, R. RFC 1122: Requirements for Internet Hosts — Communication Layers
(1989).
0.0.0.0/8“this network” and127.0.0.0/8. rfc-editor.org/rfc/rfc1122. - Cisco. CCNA (200-301) Exam Topics, IP Addressing and IPv6. cisco.com.
Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.