Subnetting
This is the arithmetic week, and the single most examined skill on the CCNA. You learn to read an IPv4 address as network bits plus host bits, to compute the four key addresses of any subnet, and to design subnets from a required host count — using one repeatable method that works for every prefix from /8 to /32.
Learning outcomes
By the end of Week 7 you will be able to
Explain why networks are subnetted and define the four key addresses of a subnet.
Compute usable hosts as 2h − 2 for any prefix, including the /31 and /32 special cases.
Find a subnet’s network, first usable, last usable, and broadcast from any IP and prefix.
Choose the tightest prefix that fits a required number of hosts.
Handle non-octet-aligned prefixes such as /13, /19, and /22.
Divide a block into many equal subnets and preview VLSM.
7 lessons + quiz
Lessons
Lesson 1Why Subnet? (Subnetting Basics)Network bits, host bits, masks and the four key addresses.
Lesson 2Hosts per SubnetUsable hosts as 2h − 2, and why router links use /30.
Lesson 3Finding the Subnet & RangeThe binary AND and the block-increment shortcut for any address.
Lesson 4Designing a Subnet for a Host CountPick the tightest prefix, then carve the parent block into subnets.
Lesson 5Non-Octet-Aligned SubnetsPrefixes such as /13, /19 and /22, and the magic-number map.
Lesson 6Subnetting Across Many Networks (Fixed-Length)Split a block into equal subnets, list them all, and preview VLSM.
Lesson 7Variable Length Subnet Masks (VLSM)Allocate largest-first, fit mixed networks in one block, summarise routes.
Self-testWeek 7 Quiz18 questions across the whole week.
Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.