Week 10 · Lesson 1

Network Attacks and Mitigations

You cannot defend a network you do not understand. This lesson names the canonical attack categories, the network-theft techniques that abuse Layer 2 and Layer 3, and the controls that stop them — segmentation, firewalls, IDS/IPS, ACLs, port security, DHCP snooping, DAI, and 802.1X.

CCNA 200-301 CyberOps 200-201 Security Fundamentals & Network Design Verified 2026-10-11
Part 1

Threat agents and the language of risk

A threat agent is anyone or anything that can attack a vulnerability. Knowing who attacks and why hints at the method used.

Threat agents · pick one to see its motivation and method

Threat agentMotivationTypical method
Script kiddieThrill, notorietyReady-made tools, automated scans
Organised crimeFinancial gainRansomware, data theft, extortion
HacktivistIdeology or protestWebsite defacement, DDoS
State-sponsored / nation-stateEspionage, disruptionLong-term, stealthy intrusion, supply chain
InsiderRevenge, profit, carelessnessMisuse of valid access, data exfiltration
Four words, four meanings. A threat is potential for harm; a vulnerability is a weakness (missing patch, default password); an exploit abuses it; risk weighs the chance and impact.
Part 2

Reconnaissance and access attacks

Reconnaissance (also footprinting and scanning) is information gathering before an attack — it maps the target so the real attack can be aimed.

Definition — reconnaissance. Reconnaissance is the authorised or malicious discovery of information about a network. A ping sweep finds live hosts; a port scan finds open services. The result is the attack surface — everything an attacker could target.

Access attacks exploit a weakness to gain entry to a system, a service, or the data on it:

Plain-language view. Access attacks are about getting in: passwords are the front door, MITM reads the mail en route, and a buffer overflow forces a door too far open.
Part 3

Denial-of-service attacks

A denial-of-service (DoS) attack makes a service unavailable to legitimate users. From many hosts at once it is a distributed denial-of-service (DDoS), typically launched from a botnet of compromised devices.

DoS type · select one, then step the SYN flood

SYN flood · step through the handshake

1 / 4

      

TypeMechanismEffect
VolumetricFlood the link with raw traffic (UDP or ICMP flood, amplification).Consumes all bandwidth.
Protocol (including SYN flood)Abuse a protocol state machine to exhaust a resource.Consumes connection tables or memory.
Application layerSend costly requests (complex searches, slow HTTP).Ties up the application itself.
Exam tip — SYN flood. A SYN flood is a TCP protocol attack that ties directly to the three-way handshake from Week 8, Lesson 4. The attacker sends many SYN segments with forged source addresses. The server replies SYN-ACK, allocates a half-open connection, and waits for an ACK that never comes. The connection backlog fills and legitimate clients can no longer connect. The defence is SYN cookies (and rate limiting), which let the server avoid committing resources until the handshake completes.

In a reflected or amplification attack the attacker spoofs the victim’s address, sends a small request to a public UDP service (DNS, NTP), and the service sends a large reply to the victim — turning a little attack traffic into a big flood.

Part 4

Malware classes

Malware is malicious software. Distinguish the categories by how they spread and what they do.

Malware classes · select one

ClassHow it worksSpreads by itself?
VirusAttaches to a host file or program and runs when the user executes it.No — needs a host and user action.
WormSelf-replicating program that exploits network services to spread.Yes — no user action needed.
TrojanDisguised as legitimate software; often installs a remote-access back door (RAT).No — user is tricked into running it.
RansomwareEncrypts files (or locks the system) and demands payment for the key.Varies; often delivered by phishing or a worm.
SpywareSecretly gathers information; keyloggers capture credentials and keystrokes.No — piggybacks on installs or bundles.
The one discriminator to remember. A virus needs a host file and the user to run it. A worm is self-contained and spreads across the network on its own. If a question stresses “spreads without user interaction,” the answer is a worm.
Part 5

Social engineering and network theft

Social engineering attacks the human, not the machine — often the easiest way past every technical control.

Why it is a network topic. Social engineering is how most malware and ransomware actually arrive. Filtering reduces the risk, but user awareness training is the real mitigation — no firewall fixes a user who hands over a password.

Network-theft techniques

These attacks target the network itself, especially the trust built into Layer 2 and Layer 3.

Part 6

Mitigations and defence in depth

Every attack has a matching control; learn these pairings. Defence in depth layers independent controls so no single failure causes compromise — the perimeter (firewall, VPN), the network (segmentation, ACLs, IDS/IPS), the host (patching, antivirus, port security, 802.1X), the application (authentication, least privilege), and the data (encryption, backups).

Defence in depth · select a layer

Network design. Segmentation and VLANs split the network into trust zones; inter-zone traffic passes a control point. A DMZ is a separate subnet for public-facing servers (web, mail, DNS).
Firewalls. Stateless filters examine each packet in isolation against ACL rules. Stateful firewalls track connections and only allow replies to sessions legitimately started. An NGFW adds application-aware inspection plus intrusion prevention; a host-based firewall is the last line of defence on the endpoint.
SystemPlacementAction
IDS (Intrusion Detection System)Out of band: it receives a copy of traffic (SPAN/TAP).Monitors and alerts — it detects and reports; it does not sit in the traffic path.
IPS (Intrusion Prevention System)In line: traffic physically passes through it.Blocks/drops malicious traffic in real time (and can reset connections).
Exam tip. One sentence, tested constantly: IDS monitors and alerts (it sees a copy, out of band); IPS is inline and blocks. If a question mentions “passive” or “copies traffic,” it is an IDS. If it mentions “inline” or “drops,” it is an IPS.

Access control lists, port security, DHCP snooping and DAI

ACLs are ordered permit/deny rules applied to router or switch interfaces that filter traffic by source, destination, protocol, and port. They are the building block for controlling which traffic may cross between segments.

! Permit only HTTPS from the user VLAN to the DMZ web server, deny the rest
R1(config)# access-list 110 permit tcp 10.1.10.0 0.0.0.255 host 10.1.99.10 eq 443
R1(config)# access-list 110 deny ip any any
R1(config)# interface GigabitEthernet0/0
R1(config-if)# ip access-group 110 in

Port security limits which source MAC addresses may appear on a switch port and how many. Options include maximum (count limit), sticky (learn allowed MACs and keep them), and the violation action — protect (silently drop), restrict (drop and log), or shutdown (err-disable the port). It counters MAC spoofing and MAC-flooding.

802.1X is port-based network access control: a device cannot pass traffic until it authenticates. It is the technical backbone of network admission control (NAC) and is covered in full in Lesson 2.

Hardening and patching

AttackWhat it doesPrimary mitigation
Reconnaissance (ping sweep / port scan)Maps live hosts and open services.IDS/IPS, firewalls, minimise exposed services, logging
Password attackGuesses or cracks credentials.Strong passwords, MFA, lockout, AAA
Buffer overflowOverwrites memory to run code.Patching, secure coding, host IPS
DoS / DDoSExhausts bandwidth, connections, or CPU.Rate limiting, scrubbing, SYN cookies, IPS
Malware (virus, worm, trojan, ransomware, spyware)Damages, spies, or holds data to ransom.Antivirus/EDR, patching, user training, backups
Social engineering (phishing, baiting, pretexting)Tricks people into acting.User awareness training, email filtering, MFA
MAC spoofingImpersonates a trusted MAC.Port security, 802.1X
ARP spoofingRedirects traffic for MITM.Dynamic ARP Inspection + DHCP snooping
DHCP starvation / rogue DHCPExhausts pool or hands out attacker gateway.DHCP snooping (trusted ports)
VLAN hoppingCrosses VLAN boundaries.Disable DTP, set native VLAN, unused ports to dead VLAN
ReplayReuses captured credentials.Timestamps/nonces, encrypted authentication
Part 7 · Your turn

Review

Check what you have learned with these review questions.

Review · 6 questions

Sources

Sources & references

  1. Cisco. CCNA (200-301) Exam Topics, Security Fundamentals and Network Security. cisco.com.
  2. Cisco. CyberOps Associate (200-201) Exam Topics, Security Concepts and Network Intrusion Analysis. cisco.com.
  3. Plummer, D. RFC 826: An Ethernet Address Resolution Protocol (ARP) (1982). rfc-editor.org/rfc/rfc826.
  4. Scarfone, K. et al. NIST SP 800-115: Technical Guide to Information Security Testing and Assessment (2008) — reconnaissance and scanning. csrc.nist.gov.
  5. Cichonski, P. et al. NIST SP 800-61 Rev. 2: Computer Security Incident Handling Guide (2012). csrc.nist.gov.
  6. Cisco. Catalyst Switch Security: DHCP Snooping and Dynamic ARP Inspection. cisco.com.

Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.