Week 2 · Lesson 4

Common Types of Networks

The exam names networks mostly by their scope — how far they reach. This lesson lays out the whole family — PAN, LAN, WLAN, CAN, MAN, WAN — plus SAN, and then the access flavours: Internet, intranet, and extranet. Get the scale order straight and most of this lesson is done.

CCNA 200-301 Domain 1.0 Network Fundamentals Verified 2026-10-11
Part 1

Networks by size and scope

Networks are most often categorised by geographic scope. Smaller types cover a person or a building; larger types interconnect the smaller ones across a city or a country. Cisco defines the scope types this way:

Scope types

PAN, LAN, WLAN, CAN, MAN, WAN. Each one nests inside the next.

Purpose types

SAN is not about size at all - it is about what the network is for.

Access types

Internet, intranet and extranet describe who is allowed in, not how far the network reaches.

The scope family · select a type
PAN LAN / WLAN CAN MAN WAN Personal Building City Global reach grows with scope

Note on the ordering. The classic exam ordering is PAN < LAN < MAN < WAN. Cisco slides also teach WLAN inside LAN, and CAN between LAN and MAN. Remember that LAN and WAN are the two you will design; the others describe how the scope picture fits together.
Part 2

Where does it fit? (the scale picture)

Anchoring each type to a place on a scale makes the ordering unforgettable. Each larger type carries the smaller ones inside it: a WAN interconnects LANs, a MAN interconnects them across a city, and a campus network joins a handful of LANs in one park. Get the direction of the arrows right and the ordering questions answer themselves.

TypeDefinitionExample
PAN — Personal Area NetworkConnects one person’s devices over a very short range (roughly 10 m).A smartwatch, wireless earbuds, and a phone exchanging data over Bluetooth (IEEE 802.15) or a USB tether.
LAN — Local Area NetworkConnects hosts within a limited area — a home, office, school, or single building.Ethernet (IEEE 802.3) and Wi-Fi are its media; a set of switches defines it logically (Week 1).
WLAN — Wireless LANA LAN accessed through wireless access points rather than cables; same logical network, no fixed cabling for hosts.IEEE 802.11.
CAN — Campus Area NetworkInterconnects several LANs across a limited campus or business park — separate buildings close to each other.Larger than a LAN, smaller than a MAN.
MAN — Metropolitan Area NetworkSpans a city or metropolitan region, interconnecting businesses and campuses.Often run by a city or a provider over fibre rings.
WAN — Wide Area NetworkSpans cities, countries, or continents, interconnecting LANs over provider circuits.The Internet is the largest WAN of all.
SAN — Storage Area NetworkNot a scope type but a purpose type: a dedicated high-speed network delivering block-level storage to servers.Fibre Channel or iSCSI. See part 6.
Part 3

Internet, intranet, extranet

Three access models, one question: who is allowed to reach the network?

Who is allowed in? · select a model

Exam tip. The fastest way to choose between the three is the audience word: public = Internet, only employees = intranet, “partners / suppliers / external but authorised” = extranet. If a scenario mentions a firewall or cautious access control around outside users, that final word is extranet.

All three run on the same TCP/IP protocols (RFC 1122). The difference is purely who the security boundary lets in — which is why firewalls and access control lists appear at the exact same point in the security weeks.

Part 4

Home networks

A home network is the most common LAN you will touch. Its signature is a single all-in-one box from the ISP or shop that plays four roles at once: a router (Layer 3, connecting home to ISP), a switch (wired LAN ports), a wireless access point (Wi-Fi), and a firewall/NAT (protecting the inside from the public Internet). It also typically runs DHCP, handing each device its address automatically.

The all-in-one box · select a role

Router

Typical members of a home network: computers, phones, tablets, TVs, streaming boxes, printers, and a growing list of IoT devices — lights, thermostats, cameras, doorbells, and sensors. The network is usually a star, physically (Lesson 3): everything hangs off the one box.

Watch out. “Home router” sounds like one function, but the exam may test that the SOHO box combines several devices. If a question asks which single appliance provides routing, switching, Wi-Fi, and NAT in a small network, the answer is the all-in-one home/router combination — not a bare router.
Part 5

SME vs enterprise scale

SME stands for Small and Medium-sized Enterprise. The scale difference between an SME and an enterprise changes the design, not just the budget:

DimensionSME networkEnterprise network
Sites and usersOne or a few sites; tens to a few hundred users.Many sites and thousands of users, internationally.
EquipmentOff-the-shelf switches and routers; often one core L3 switch.Structured hierarchical design (core, distribution, access) with redundant pairs at each layer.
StaffA small IT team or an external provider; network admin often part-time.Dedicated network engineers and security staff on shift.
ResilienceGood practice but budget-limited; limited redundancy.Redundant links, devices, power, and WAN circuits — fault tolerance expected.
PolicySimple flat LAN; basic firewalling at the edge.VLANs, segmentation, QoS, central identity, deep security monitoring.

Same components, different discipline. The enterprise organises where the VLANs break, where the redundancy lives, and who is allowed on each segment (Week 8 and the security weeks). The SME keeps the same ideas at a size an owner can manage.

Part 6

Storage area networks (SAN)

A Storage Area Network exists for one narrow job: giving servers access to block-level storage over a dedicated, very fast network. Instead of files over the LAN (that is a NAS — Network Attached Storage, which sits on the ordinary LAN and serves files), a SAN carries raw disk blocks between servers and storage arrays on their own fabric, away from user traffic.

SAN or NAS? · select one

Exam tip. SAN vs NAS is a favourite quick-fire question. Memory hook: SAN = blocks for servers (dedicated); NAS = files for clients (on the LAN). If a question says “shared disk that several file clients map as a drive,” that is NAS, not SAN.
TypeCategoryTypical scopeExample
PANScopeA person, ~10 mPhone, smartwatch, earbuds over Bluetooth
LANScopeOne building or homeOffice Ethernet + Wi-Fi
WLANScope (wireless LAN)Same as a LAN, wirelessWi-Fi access in an airport lounge
CANScopeA campus / business parkUniversity linking several buildings
MANScopeA city or metro regionA city fibre ring for municipalities
WANScopeCountries and continentsBranch offices joined by provider circuits
SANPurposeA dedicated storage fabricServers → Fibre Channel switch → storage array

Two last scales worth keeping in one mental picture: the scope ladder (PAN → LAN → CAN/MAN → WAN, each nestling inside the next) and the access ladder (Internet is public, intranet is internal, extranet is internal-plus-invited-guests). Those two ladders are the entire lesson.

Part 7

Sources & references

  1. Cisco Networking Academy. Introduction to Networks (ITN), Module 1 — Networking Today: “Common Types of Networks” (PAN, LAN, WLAN, CAN, MAN, WAN, SAN). skillsforall.com.
  2. Braden, R. RFC 1122: Requirements for Internet Hosts — Communication Layers (1989). rfc-editor.org/rfc/rfc1122.
  3. IETF. RFC 7143: Internet Small Computer System Interface (iSCSI) Protocol (2014). rfc-editor.org/rfc/rfc7143.
  4. IEEE. IEEE 802.3 and IEEE 802.11 (LAN and wireless LAN media). standards.ieee.org.
  5. Cisco. CCNA (200-301) Exam Topics, Network Fundamentals (1.0). cisco.com.
Part 8 · Your turn

Review

Check what you have learned with these review questions.

Review · 6 questions

Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.