Week 5 · Lesson 2

MAC Address

Every network interface in the world carries a 48-bit identifier burned into it at the factory. It is how a frame knows which device on the local link should receive it. Get the bit-level facts exactly right — the exam tests them directly.

CCNA 200-301 Domain 1.0 Network Fundamentals Verified 2026-10-11
Part 1

What a MAC address is

A MAC address (Media Access Control address) is a 48-bit physical address used at Layer 2. Forty-eight bits is 6 octets (6 bytes), and each octet is written as two hexadecimal digits. A canonical example is 00:1A:2B:3C:4D:5E.

Count the octets: 00, 1A, 2B, 3C, 4D, 5E — that is six. Six octets × 8 bits = 48 bits. Because hexadecimal uses 16 symbols (0–9, A–F), two hex digits represent exactly one octet (8 bits). A MAC address has nothing to do with the IP address; the two live at different layers and serve different purposes.

Definition — MAC address. A 48-bit (6-octet) hexadecimal address that uniquely identifies a network interface on a local link. It is used by Layer 2 to deliver frames to the correct device on the same segment.
Exam tip. Two numbers are tested constantly: a MAC address is 48 bits long and made of 6 octets. Compare with IPv4 (32 bits, 4 octets) and IPv6 (128 bits). If an option offers 32 bits for a MAC address, it is a trap.
MAC decoder · type an address or pick an example
Part 2

The burned-in address (BIA)

The MAC address that a device ships with is called the burned-in address (BIA). It is programmed into the interface’s read-only memory (ROM) on the network interface card by the manufacturer, which is why it is described as “burned in”. Because it is baked into the hardware, every NIC made should carry a globally unique address.

In practice a device can override its burned-in address with a software-configured value (a “locally administered” address — see Part 4), but for the exam and for normal operation, the MAC address is the factory-assigned BIA. In Cisco IOS the BIA is shown with the show interfaces command, labelled Hardware address or bia.

Part 3

Anatomy: OUI + NIC-specific

A 48-bit address is not random. It splits neatly into two 24-bit halves.

First 24 bits (first 3 octets) — the OUI. The Organizationally Unique Identifier is assigned by the IEEE to a specific manufacturer or organisation. Seeing a particular OUI tells you the vendor of the interface.
Last 24 bits (last 3 octets) — the NIC-specific portion. Assigned by that manufacturer to make each of its interfaces unique. You will also see this called the “extension identifier” or “serial number” part.

For 00:1A:2B:3C:4D:5E, the OUI is 00:1A:2B and the NIC-specific part is 3C:4D:5E. The manufacturer that owns 00:1A:2B can mint up to 224 distinct addresses under it (about 16.7 million) without colliding with anyone else.

First 3 octets (OUI)Meaning
00:00:0CCisco Systems (commonly listed).
00:50:56VMware (commonly listed).
00:11:22Illustrative example only — shown to demonstrate format, not a guaranteed vendor assignment.
Note. OUI assignments are managed by the IEEE Registration Authority and can be added or transferred over time. Treat any OUI table as a convenience, and confirm a live assignment in the official IEEE OUI registry before relying on it. The 00:1A:2B used throughout this lesson is an example, not an authoritative vendor lookup.
Notation · the same 48 bits, three ways

Part 4

The two special bits in the first octet

The first octet carries two fields that change the meaning of the whole address. They are the two least significant bits of the first octet.

Bit 0 — I/G (Individual/Group). A value of 0 means the address is unicast (one individual interface). A value of 1 means the address is group, i.e. multicast (many interfaces).
Bit 1 — U/L (Universal/Local). A value of 0 means the address is universally administered — globally unique, assigned by the vendor from its OUI. A value of 1 means it is locally administered — set in software by an administrator and not guaranteed unique.
First octet bit viewer · pick a value

First octetBinaryI/G (bit 0)U/L (bit 1)Meaning
000000 000000Unicast, universally administered
010000 000110Multicast / group
020000 001001Unicast, locally administered
030000 001111Multicast, locally administered
Exam tip. Remember the order: bit 0 = I/G (first line: unicast or multicast) and bit 1 = U/L (second line: universal or local). An odd first octet means the I/G bit is set, so the address is a multicast/group address. A first octet of 02 is the classic locally administered example.
Part 5

Broadcast and other special addresses

The all-ones address is reserved: FF:FF:FF:FF:FF:FF — the Layer-2 broadcast, received by every device on the segment.

The first octet FF is 1111 1111, so the I/G bit is set — it is a group address in which the group happens to be everyone on the local link. A frame sent to this address is received by all interfaces on the segment. Other group addresses (those whose I/G bit is set, but which are not all-ones) are ordinary multicast addresses, which you meet in the next lesson.

Part 6

MAC addresses are local only

The single most misunderstood fact about MAC addresses: they are meaningful only on the local link. A MAC address is not routed. As a packet crosses a router, the router removes the incoming frame and builds a new frame with new source and destination MAC addresses for the next link. The IP addresses stay the same end to end, but the MAC addresses are rewritten at every Layer-3 hop.

Watch out. Do not think of a MAC address as an end-to-end address on the Internet. It only identifies an interface on the segment it is attached to. Two different frames on the Internet, carrying the same packet, can have completely different MAC addresses — and a host on another network never sees your MAC address.
One packet, three links · select the link

Part 7 · Your turn

Review

Check what you have learned with these review questions.

Review · 6 questions

Sources

Sources & references

  1. IEEE. IEEE 802.3: Ethernet (MAC address structure and the I/G and U/L bits). standards.ieee.org.
  2. IEEE Registration Authority. OUI Public Listing. standards-oui.ieee.org.
  3. Braden, R. RFC 1122: Requirements for Internet Hosts — Communication Layers (1989), Section 1.3.3. rfc-editor.org/rfc/rfc1122.
  4. Cisco. CCNA (200-301) Exam Topics, Network Fundamentals. cisco.com.

Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.