Week 5 · Lesson 3

Delivery Options (Casting)

A frame can be addressed to one device, to every device on the segment, or to a chosen group. Those three delivery models — unicast, broadcast, and multicast — determine how a switch moves the frame, and they appear at both Layer 2 and Layer 3.

CCNA 200-301 Domain 1.0 Network Fundamentals Verified 2026-10-11
Part 1

Three delivery models

Whenever data is sent, the sender chooses how many recipients it wants and which ones. Networking names those choices:

Unicast

One sender to one receiver (one-to-one).

Broadcast

One sender to all devices on the segment (one-to-all).

Multicast

One sender to a group of interested receivers (one-to-many, selective).

The same three ideas exist at Layer 2 (MAC addresses) and Layer 3 (IP addresses). The exam expects you to keep the two layers straight, because the addresses look completely different.

Unicast, broadcast and multicast · select a type

Source host H1 · IP 192.168.1.5 · MAC 00-07-E9-63-CE-53

    Part 2

    Unicast

    Unicast is a one-to-one transmission. The destination address identifies a single interface, and only that interface processes the frame.

    Unicast is the everyday case: a web request, an email, a file transfer. A switch looks up the destination MAC in its MAC address table and forwards the frame out of one port. If the address is not yet known (unknown unicast), the switch floods the frame out all other ports — the temporary exception that lets the table be learned.

    Part 3

    Broadcast

    Broadcast is one-to-all: every device on the local segment must receive and process the frame. Broadcasts stay within their segment — routers do not forward them.

    Broadcasts are useful for discovery. A host that needs to find the MAC address for an IP it already knows uses ARP, sending an ARP request to the broadcast MAC. Because a broadcast interrupts every device, too much broadcast traffic wastes bandwidth — which is why broadcast domains are kept small (routers and VLANs divide them).

    Exam tip. FF:FF:FF:FF:FF:FF is the Layer-2 broadcast. At Layer 3, 255.255.255.255 is the limited broadcast and is not forwarded by routers. A switch floods a broadcast out every port in the same VLAN except the one it arrived on.
    Part 4

    Multicast

    Multicast is one-to-many, but selectively: a frame is designed to reach a group of hosts that have joined a group address. Hosts that did not join ignore it. This is efficient for streaming, routing-protocol updates, and service discovery.

    The mapping rule: the low-order 23 bits of the IPv4 multicast address are copied into the last 23 bits of the MAC address 01:00:5E:00:00:00. One bit in that OUI byte is fixed to 0, which is why 228 IPv4 multicast addresses collapse into 223 MAC addresses and several groups can share one MAC address. For the exam, remember the headline: IPv4 multicast MAC addresses start with 01:00:5E.

    Note. Do not confuse the two prefixes. The Layer-2 broadcast is FF:FF:FF:FF:FF:FF, while IPv4 multicast maps to 01:00:5E:..:..:.. . (IPv6 multicast uses a different prefix, 33:33, which you do not need for this week.)
    IPv4 multicast → Ethernet multicast · type an IPv4 group address

    Part 5

    Anycast (IPv6)

    Anycast is a one-to-nearest delivery option: several devices are configured with the same address, and the network delivers the traffic to whichever one is closest (per the routing metric). It is used in IPv6 for services such as finding the nearest DNS server or the nearest content cache. IPv4 has no native anycast address type; the concept is associated mainly with IPv6. You only need to recognise the term and the one-line definition.

    One address, many devices · anycast at a glance
    Client Server A · 2001:db8::1 Server B · 2001:db8::1 Server C · 2001:db8::1 nearest wins by routing metric

    Part 6

    How a switch handles each

    The delivery type directly changes what a Layer-2 switch does with a frame.

    Exam tip. The pattern: a switch forwards a known unicast to a single port but floods broadcasts and multicasts. Flooding means “out every port in the VLAN except the one it arrived on”.
    Switch behaviour · select the destination type

    Delivery typeAddress exampleWho receives itSwitch behaviour
    UnicastMAC 00:1A:2B:3C:4D:5E; IP 192.168.1.10One interface onlyForward out one port (flood if unknown)
    BroadcastMAC FF:FF:FF:FF:FF:FF; IP 255.255.255.255 or a network broadcastAll devices on the segmentFlood out all ports in the VLAN
    MulticastMAC 01:00:5E:xx:xx:xx; IP 224.0.0.0/4A subscribed groupFlood by default; selective with IGMP snooping
    AnycastIPv6 (one-to-nearest)The closest member of a groupRouted to nearest member (Layer 3)
    Part 7 · Your turn

    Review

    Check what you have learned with these review questions.

    Review · 6 questions

    Sources

    Sources & references

    1. Mogul, J. RFC 919: Broadcasting Internet Datagrams (1984). rfc-editor.org/rfc/rfc919.
    2. Mogul, J. RFC 922: Broadcasting Internet Datagrams in the Presence of Subnets (1984). rfc-editor.org/rfc/rfc922.
    3. Braden, R. RFC 1122: Requirements for Internet Hosts — Communication Layers (1989), Section 3.2.2 (broadcast) and Section 3.3.6 (multicast). rfc-editor.org/rfc/rfc1122.
    4. IEEE. IEEE 802.3: Ethernet (group and broadcast MAC addressing). standards.ieee.org.
    5. Cisco. CCNA (200-301) Exam Topics, Network Fundamentals. cisco.com.

    Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.