MAC Address
Every network interface in the world carries a 48-bit identifier burned into it at the factory. It is how a frame knows which device on the local link should receive it. Get the bit-level facts exactly right — the exam tests them directly.
What a MAC address is
A MAC address (Media Access Control address) is a 48-bit physical address used at Layer 2. Forty-eight bits is 6 octets (6 bytes), and each octet is written as two hexadecimal digits. A canonical example is 00:1A:2B:3C:4D:5E.
Count the octets: 00, 1A, 2B, 3C, 4D, 5E — that is six. Six octets × 8 bits = 48 bits. Because hexadecimal uses 16 symbols (0–9, A–F), two hex digits represent exactly one octet (8 bits). A MAC address has nothing to do with the IP address; the two live at different layers and serve different purposes.
The burned-in address (BIA)
The MAC address that a device ships with is called the burned-in address (BIA). It is programmed into the interface’s read-only memory (ROM) on the network interface card by the manufacturer, which is why it is described as “burned in”. Because it is baked into the hardware, every NIC made should carry a globally unique address.
In practice a device can override its burned-in address with a software-configured value (a “locally administered” address — see Part 4), but for the exam and for normal operation, the MAC address is the factory-assigned BIA. In Cisco IOS the BIA is shown with the show interfaces command, labelled Hardware address or bia.
Anatomy: OUI + NIC-specific
A 48-bit address is not random. It splits neatly into two 24-bit halves.
For 00:1A:2B:3C:4D:5E, the OUI is 00:1A:2B and the NIC-specific part is 3C:4D:5E. The manufacturer that owns 00:1A:2B can mint up to 224 distinct addresses under it (about 16.7 million) without colliding with anyone else.
| First 3 octets (OUI) | Meaning |
|---|---|
| 00:00:0C | Cisco Systems (commonly listed). |
| 00:50:56 | VMware (commonly listed). |
| 00:11:22 | Illustrative example only — shown to demonstrate format, not a guaranteed vendor assignment. |
00:1A:2B used throughout this lesson is an example, not an authoritative vendor lookup.The two special bits in the first octet
The first octet carries two fields that change the meaning of the whole address. They are the two least significant bits of the first octet.
0 means the address is unicast (one individual interface). A value of 1 means the address is group, i.e. multicast (many interfaces).0 means the address is universally administered — globally unique, assigned by the vendor from its OUI. A value of 1 means it is locally administered — set in software by an administrator and not guaranteed unique.| First octet | Binary | I/G (bit 0) | U/L (bit 1) | Meaning |
|---|---|---|---|---|
| 00 | 0000 0000 | 0 | 0 | Unicast, universally administered |
| 01 | 0000 0001 | 1 | 0 | Multicast / group |
| 02 | 0000 0010 | 0 | 1 | Unicast, locally administered |
| 03 | 0000 0011 | 1 | 1 | Multicast, locally administered |
02 is the classic locally administered example.Broadcast and other special addresses
The all-ones address is reserved: FF:FF:FF:FF:FF:FF — the Layer-2 broadcast, received by every device on the segment.
The first octet FF is 1111 1111, so the I/G bit is set — it is a group address in which the group happens to be everyone on the local link. A frame sent to this address is received by all interfaces on the segment. Other group addresses (those whose I/G bit is set, but which are not all-ones) are ordinary multicast addresses, which you meet in the next lesson.
MAC addresses are local only
The single most misunderstood fact about MAC addresses: they are meaningful only on the local link. A MAC address is not routed. As a packet crosses a router, the router removes the incoming frame and builds a new frame with new source and destination MAC addresses for the next link. The IP addresses stay the same end to end, but the MAC addresses are rewritten at every Layer-3 hop.
Review
Check what you have learned with these review questions.
Sources & references
- IEEE. IEEE 802.3: Ethernet (MAC address structure and the I/G and U/L bits). standards.ieee.org.
- IEEE Registration Authority. OUI Public Listing. standards-oui.ieee.org.
- Braden, R. RFC 1122: Requirements for Internet Hosts — Communication Layers (1989), Section 1.3.3. rfc-editor.org/rfc/rfc1122.
- Cisco. CCNA (200-301) Exam Topics, Network Fundamentals. cisco.com.
Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.