Week 9

Application Layer

The top of the stack, where the network finally does something a person asked for: resolving a name, sending mail, handing out an address, moving a file. This week covers the application-layer protocols the CCNA expects you to know by name, by port, and by message sequence — DNS, email, DHCP, and the FTP/TFTP pair.

CCNA 200-301 Application Layer & IP Services 13 lessons + 1 lab + quiz
Learning outcomes

By the end of Week 9 you will be able to

Explain the role of the application layer and how applications use transport ports.
Trace a DNS lookup, including the resolver, root, TLD, and authoritative servers.
Describe email roles (MUA, MTA, MDA) and the SMTP, POP3, and IMAP4 ports.
Explain the DHCP DORA process, its UDP ports, leases, and relay agents.
Distinguish FTP from TFTP and state their ports, transports, and use cases.
Configure DHCP and use TFTP for IOS backup on Cisco devices.
15 items

Lessons

Lesson 11. Application LayerEverything below this layer exists to serve it. The Application layer is where users and their programs meet the… Lesson 22. DNS Protocol - Part 1You can remember a name like www.example.com; a router cannot route to a word. The Domain Name System (DNS) is the… Lesson 33. DNS Protocol - Part 2Lesson 2 said DNS is a phone book — now you open the book. The pages are resource records, and reading them is the… Lesson 44. Email ProtocolsEmail looks simple from the outside — type a message, press send, it arrives. Underneath, it is a relay race between… Lesson 55. DHCPEvery time a laptop joins a network, it needs four things before it can do anything: an IP address, a subnet mask, a… Lesson 66. FTP and TFTPTwo file-transfer protocols, two very different designs. FTP is the full-featured original: authenticated,… Lesson 77. NAT ConceptsMillions of private addresses live behind a handful of public ones. The mechanism that makes that possible is Network… Lesson 88. Static NAT & NAT PoolsLesson 7 gave you the vocabulary. Now you configure it. This lesson covers the two 1:1 forms of NAT — static NAT,… Lesson 99. NAT with PAT (Overload)This is the NAT the real world runs: PAT (Port Address Translation), the overload configuration that lets an entire… Lesson 1010. NTPA network whose devices disagree on the time cannot bill correctly, correlate logs, or renew certificates on… Lesson 1111. SNMPA network manager needs to see thousands of devices at once — their CPU, memory, interface errors, even configuration… Lesson 1212. SyslogWhen a router’s interface flaps or a switch’s CPU spikes at 2:00 a.m., the evidence is written as a syslog message —… Lesson 1313. QoS & Per-Hop BehaviorAll packets are equal on the wire — but not all traffic is equal to the business. A dropped VoIP voice stream is a… LabNAT LabNow you make NAT real. In this lab you build a small office network whose hosts live on private RFC 1918 addresses,… QuizWeek 9 Quiz QuizSixteen multiple-choice questions covering the IP Services half of Week 9: NAT concepts and the static/dynamic/PAT…

Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.