Practice Exam 2
A second full-length practice exam of 56 questions, in the same four-part format as Exam 1 but with an entirely different set of question wording. Sit it timed at 120 minutes. If you scored well on Exam 1 through memory of its answers, this exam is the honest second opinion.
How to sit this exam
Same rules as the real thing: a 120-minute limit, no notes, no second screen. Cisco does not publish an exact pass mark, but a score around 825/1000 has long been the reference. Aim for 85% or better here and treat anything under 80% as a prompt to revisit that domain's question bank.
Do not rush. With only 56 questions, the time allowance leaves room to check your work. Read every option before answering — the exam rewards the answer that is precisely correct, not merely plausible.
Part 1 — Network Fundamentals
Select the single best answer. Feedback appears immediately.
-
What is the correct Layer 4 name for the data unit produced by UDP?
- Packet
- Frame
- Datagram
- Bits
UDP produces a datagram at Layer 4, while TCP produces a segment. Packets belong to Layer 3, frames to Layer 2, and bits to Layer 1.
-
Which device stops a broadcast from crossing into another network?
- Switch
- Hub
- Router
- Repeater
A router separates broadcast domains; it does not forward broadcasts between networks. Switches and hubs each form a single broadcast domain.
-
In which topology is every device connected to a central device?
- Mesh
- Star
- Ring
- Bus
A star has a central device (typically a switch) with every node attached to it. A full mesh connects every node to every other node.
-
In classful addressing, to which class does 172.16.0.0 belong?
- Class A
- Class B
- Class C
- Class D
Class B covers 128–191 in the first octet, so 172.16.0.0 is Class B. Class A is 1–126, Class C is 192–223, and Class D is multicast.
-
Which range is reserved for IPv4 loopback?
- 127.0.0.0/8
- 169.254.0.0/16
- 224.0.0.0/4
- 10.0.0.0/8
127.0.0.0/8 is loopback (localhost is 127.0.0.1). 169.254.0.0/16 is APIPA, 224.0.0.0/4 is multicast, and 10.0.0.0/8 is private.
-
How many subnets are created by borrowing 3 host bits?
- 3
- 6
- 8
- 16
Each borrowed bit doubles the subnet count: 23 = 8 subnets.
-
Which of these is a unique local IPv6 address?
- FE80::1
- 2001:db8::1
- FD00::1
- FF02::1
Unique local addresses fall in FC00::/7, which includes FD00::/8. FE80:: is link-local, 2001:db8:: is documentation global unicast, and FF02:: is multicast.
-
Which Ethernet frame field is used to detect transmission errors?
- Preamble
- Frame Check Sequence (FCS)
- Type/EtherType
- Data/Payload
The trailing FCS carries a CRC used to detect corruption. The preamble synchronises, and the EtherType identifies the upper-layer protocol.
-
Which fibre type uses a larger core and is limited to shorter distances?
- Single-mode fibre
- Multimode fibre
- Coaxial copper
- Shielded twisted pair
Multimode fibre has a wider core, allows multiple light paths, and is used over shorter runs. Single-mode has a narrow core and reaches much farther.
-
Which statement about bandwidth and throughput is correct?
- Throughput can never be lower than bandwidth
- Throughput is the measured rate and never exceeds bandwidth
- They are always identical
- They are unrelated measurements
Bandwidth is the theoretical maximum; throughput is what you actually measure and is lower once overhead, errors, and congestion are accounted for.
-
Which is a valid IPv4 multicast MAC address?
- 01:00:5E:xx:xx:xx
- FF:FF:FF:FF:FF:FF
- 00:00:0C:xx:xx:xx
- 33:33:xx:xx:xx:xx
IPv4 multicast maps to 01:00:5E followed by the low 23 bits of the group address. FF:FF:FF is broadcast, 00:00:0C is a Cisco OUI, and 33:33 is used for IPv6 multicast mapping.
-
Which protocol resolves an IPv4 address into a MAC address on a LAN?
- DNS
- ARP
- DHCP
- ICMP
ARP maps a known IPv4 address to a MAC address. DNS maps names to IP addresses, DHCP assigns addresses, and ICMP carries control and error messages.
-
Which command shows active TCP connections and listening ports?
- ping
- tracert
- netstat
- arp
netstatlists connections and listening ports.pingtests reachability,tracerttraces a path, andarpshows the ARP cache. -
In which band are channels 1, 6, and 11 the non-overlapping set?
- 5 GHz
- 2.4 GHz
- 6 GHz
- 60 GHz
In the 2.4 GHz band, channels 1, 6, and 11 do not overlap. The 5 GHz band has many more non-overlapping channels available.
-
What is the role of a network interface card (NIC)?
- Route packets between networks
- Convert data into signals and hold the device MAC address
- Filter traffic by security policy
- Assign IP addresses dynamically
The NIC connects a host to the medium, converts frames to signals, and carries the burned-in MAC address. Routing, filtering, and DHCP are other devices' jobs.
-
How does a container differ from a virtual machine?
- Containers share the host OS kernel; each VM includes its own full OS
- Containers each need a hypervisor
- VMs are lighter on resources than containers
- They are functionally identical
A container packages an application and its dependencies but shares the host kernel, while a VM runs a complete guest operating system on a hypervisor and is heavier.
Part 2 — Network Access
VLANs, trunking, discovery, EtherChannel, STP, and wireless.
-
Which VLANs form the normal range on a Cisco switch?
- 0–1000
- 1–1005
- 1–4094
- 1006–4094
The normal range is 1–1005; the extended range is 1006–4094. The absolute VLAN range is 1–4094.
-
Which VLAN is the default on a Cisco switch?
- VLAN 0
- VLAN 1
- VLAN 100
- VLAN 999
VLAN 1 is the default VLAN and cannot be deleted; every port starts as a member of it.
-
Which command converts a switch port from access to trunk mode?
- switchport mode access
- switchport mode trunk
- switchport access vlan 10
- no switchport
switchport mode trunkenables trunking.no switchportmakes the port a routed Layer 3 interface, not a trunk. -
Which VLAN numbers are reserved for legacy technologies on many switches?
- 1–1005
- 1002–1005
- 1–4094
- 1006–4094
VLANs 1002–1005 are reserved for legacy Token Ring and FDDI defaults and cannot be used for normal traffic.
-
Which DTP mode actively attempts to form a trunk?
- dynamic auto
- dynamic desirable
- access
- trunk with nonegotiate
Dynamic desirable initiates trunking; dynamic auto only responds. Access mode never trunks, and nonegotiate disables DTP entirely.
-
Which guard shuts down a PortFast port that receives a BPDU?
- Root guard
- BPDU guard
- Loop guard
- Port security
BPDU guard err-disables a PortFast port that receives a BPDU, because an end-device port should never see one. Root guard protects the root election.
-
Which STP port state learns MAC addresses but does not yet forward frames?
- Blocking
- Listening
- Learning
- Disabled
In the learning state the port builds the MAC table but still does not forward. Listening neither forwards nor learns, and blocking only receives BPDUs.
-
Which is a default STP timer value?
- Hello time 1 second
- Hello time 2 seconds
- Max age 10 seconds
- Forward delay 5 seconds
STP defaults are hello 2 s, forward delay 15 s, and max age 20 s.
-
The PAgP negotiation protocol belongs to which category?
- Open standard
- Cisco-proprietary
- IEEE standard
- IETF standard
PAgP is Cisco-proprietary; LACP is the IEEE 802.3ad open standard for link aggregation.
-
Which command verifies an EtherChannel bundle?
- show etherchannel summary
- show vlan
- show cdp neighbors
- show ip route
show etherchannel summaryreports the bundle protocol and member ports. The others show VLANs, neighbours, or routes. -
Which protocol propagates VLAN information to other switches in the same management domain?
- VTP
- DTP
- STP
- LLDP
VTP (VLAN Trunking Protocol) synchronises the VLAN database. DTP negotiates trunking, STP prevents loops, and LLDP discovers neighbours.
-
Which wireless security method is now considered obsolete and insecure?
- WEP
- WPA2
- WPA3
- SAE
WEP's static RC4 keys are trivially broken and should never be used. WPA2 and WPA3 are the modern choices, with WPA3 using SAE.
-
Which WLC deployment mode suits a small branch that wants traffic switched locally at the AP?
- FlexConnect
- Local
- Sniffer
- Monitor
FlexConnect lets an AP switch client traffic locally if the WLC tunnel is unavailable, which suits branches. Local mode centralises traffic; sniffer and monitor are diagnostic modes.
-
Which command generates the keys required to enable SSH on a Cisco router?
- access-list 1 permit any
- crypto key generate rsa
- hostname R1
- ip domain-name example.com
crypto key generate rsacreates the RSA key pair SSH needs. Hostname and domain name must be set first, but generating the keys is the enabling step.
Part 3 — IP Connectivity
Routing tables, forwarding decisions, static routing, OSPFv2, and first hop redundancy.
-
What is the administrative distance of EIGRP?
- 90
- 100
- 110
- 120
EIGRP is 90, which is lower than OSPF (110) or RIP (120), so EIGRP is preferred when both learn the same prefix.
-
What is the administrative distance of a directly connected route?
- 0
- 1
- 90
- 255
Connected routes are the most trusted at AD 0; static routes are 1. AD 255 is a route that is never installed.
-
In the output of
show ip route, which code marks a directly connected network?- S
- C
- L
- O
C is the connected network; L is the local /32 address of the interface itself; S is static and O is OSPF.
-
Which route acts as the gateway of last resort?
- A /32 static route
- The default route 0.0.0.0/0
- An OSPF external route
- A directly connected route
The default route 0.0.0.0/0 matches everything and is used when no more specific route exists, so it becomes the gateway of last resort.
-
Which route is a host route?
- 10.0.0.0/8
- 10.1.1.1/32
- 0.0.0.0/0
- 172.16.0.0/12
A /32 mask matches a single host address, which is why 10.1.1.1/32 is a host route.
-
Which OSPF neighbour state indicates a fully synchronised adjacency?
- DOWN
- INIT
- 2-WAY
- FULL
FULL means the link-state databases are synchronised. 2-WAY is the normal steady state between DROther routers on a broadcast segment.
-
On an OSPF point-to-point link, what is true about the designated router?
- A DR and BDR are elected
- No DR or BDR election occurs
- Only a DR is elected
- Only a BDR is elected
Point-to-point networks form a direct adjacency with no DR/BDR election. DR and BDR are elected only on broadcast and non-broadcast multi-access segments.
-
On a broadcast OSPF segment, which state do two DROther routers normally reach with each other?
- FULL
- 2-WAY
- EXSTART
- LOADING
DROther routers stay in 2-WAY because they exchange routes through the DR and BDR rather than directly. They reach FULL with the DR and BDR.
-
What is the default OSPF dead interval on a broadcast network?
- 10 seconds
- 20 seconds
- 30 seconds
- 40 seconds
The hello interval is 10 s and the dead interval is four times that, 40 s, on broadcast and point-to-point links.
-
Which command builds a floating static default route as a backup?
- ip route 0.0.0.0 0.0.0.0 10.1.1.1 200
- ip route 0.0.0.0 0.0.0.0 10.1.1.1 1
- ip default-gateway 10.1.1.1
- ip route connected 0.0.0.0
The trailing 200 is a deliberately high administrative distance, so the route floats (stays out of the table) until the primary route fails.
-
Which first hop redundancy protocol is an open standard?
- HSRP
- VRRP
- GLBP
- DTP
VRRP is the IETF open standard. HSRP and GLBP are Cisco-proprietary, and DTP is a trunking protocol.
-
Which FHRP supports up to four active forwarders for load sharing?
- HSRP
- VRRP
- GLBP
- OSPF
GLBP (Gateway Load Balancing Protocol) can use up to four forwarders, each answering ARP for the shared virtual IP so client traffic is spread across gateways.
-
What is the default priority in VRRP?
- 1
- 100
- 110
- 255
VRRP defaults to priority 100, the same as HSRP, with the highest priority winning the master/active role.
-
Which command starts an OSPF process and enters OSPF router configuration mode?
- router ospf 1
- ospf 1 area 0
- network 0.0.0.0
- ip ospf 1
router ospf 1enables OSPF process 1. Networks are then advertised with thenetworkcommand inside that process.
Part 4 — IP Services, Security & Automation
NAT, DHCP, NTP, syslog, SNMP, QoS, ACLs, Layer 2 security, VPNs, and automation.
-
Which statement describes static NAT?
- A fixed one-to-one mapping between an inside and a public address
- Many inside hosts sharing one public address
- A translation that uses source ports to multiplex
- A pool of addresses assigned on demand
Static NAT maps one inside address permanently to one public address, which is useful for hosting a server. Many-to-one and port-based sharing describe PAT.
-
Which command displays the current NAT translation table?
- show ip nat translations
- show ip route
- show ip interface brief
- show arp
show ip nat translationslists inside local/global and outside local/global mappings. The other commands describe routing, interfaces, or the ARP cache. -
Which NTP stratum is a device directly attached to a reference clock?
- Stratum 0
- Stratum 1
- Stratum 15
- Stratum 16
Stratum 0 is the reference clock itself; a server directly attached to it is stratum 1. Stratum 16 means unsynchronised.
-
Which DHCP message does the server send in reply to a client's Discover?
- Offer
- Request
- Acknowledge
- Discover
In DORA the server replies to Discover with an Offer; the client then sends Request and the server finishes with Acknowledge.
-
Which syslog severity level number represents "informational"?
- 0
- 3
- 6
- 7
Syslog levels run 0 emergency through 7 debugging; level 6 is informational and level 3 is error.
-
What does SNMP use to describe managed objects in a structured way?
- The Management Information Base (MIB)
- An access control list
- A DSCP value
- A VLAN database
The MIB is the hierarchical database of managed objects an SNMP agent exposes. ACLs, DSCP, and VLANs are unrelated.
-
Which QoS action delays packets to smooth out bursts, rather than dropping them?
- Policing
- Shaping
- Marking
- Classification
Shaping buffers excess traffic to slow it to a target rate, while policing drops or remarks excess traffic. Marking and classification happen earlier in the process.
-
Which ACL number range identifies a standard numbered ACL?
- 1–99
- 100–199
- 1300–1999
- 2000–2699
Standard ACLs use 1–99 and the expanded range 1300–1999. Extended ACLs use 100–199 and 2000–2699.
-
Which command applies ACL 10 to an interface in the inbound direction?
- ip access-group 10 in
- access-list 10 in
- ip access-class 10 in
- acl 10 in
ip access-group 10 inbinds the named or numbered ACL to the interface.ip access-classrestricts VTY line access, not interface traffic. -
Which threat does DHCP snooping primarily defend against?
- A rogue DHCP server handing out false addresses
- ARP spoofing between hosts
- MAC address table flooding
- A rogue STP root bridge
DHCP snooping marks trusted ports and drops OFFER/ACK messages from untrusted ports, blocking a rogue server. ARP spoofing is DAI's target; flooding is port security's.
-
Which VPN type permanently links two sites over an untrusted network?
- Site-to-site IPsec VPN
- Remote-access VPN
- SSL web VPN
- A client-based VPN
A site-to-site IPsec tunnel connects two fixed gateways, typically to link branch and headquarters networks. Remote-access and SSL VPNs serve individual users.
-
Which data format represents objects as key-value pairs using braces and is common in REST APIs?
- XML
- JSON
- YAML
- CSV
JSON uses braces for objects and brackets for arrays, with key-value pairs. XML uses angle-bracket tags, and YAML uses indentation.
Review table
Use this table to route a missed question back to its domain and lesson.
| Questions | Domain | Where to revise |
|---|---|---|
| 1–5 | 1.0 Network Fundamentals | Week 1 · Key Concepts; Week 3 · Reference Models |
| 6–10 | 1.0 Network Fundamentals | Week 7 · Subnetting; Week 5 · Ethernet Frames; Week 6 · IPv6 |
| 11–16 | 1.0 Network Fundamentals | Week 5 · MAC and ARP; Week 4 · Wireless; Week 11 · Virtualization |
| 17–24 | 2.0 Network Access | Week 5 · VLAN, Trunking, DTP, STP |
| 25–30 | 2.0 Network Access | Week 5 · EtherChannel, VTP; Week 10 · Wireless Security; Week 4 · WLC |
| 31–35 | 3.0 IP Connectivity | Week 6 · Routing Table; Week 3 · Static Routing |
| 36–40 | 3.0 IP Connectivity | Week 6 · OSPFv2 fundamentals and configuration |
| 41–44 | 3.0 IP Connectivity | Week 6 · First Hop Redundancy Protocols |
| 45–48 | 4.0 IP Services | Week 9 · NAT, DHCP, NTP |
| 49–52 | 4.0 IP Services | Week 9 · Syslog, SNMP, QoS |
| 53–55 | 5.0 Security Fundamentals | Week 10 · ACLs, Layer 2 Security, VPNs |
| 56 | 6.0 Automation and Programmability | Week 12 · Data Formats: JSON, XML, YAML |
Sources & references
- Cisco. CCNA Exam v1.1 (200-301) Exam Topics. learningcontent.cisco.com.
- Moy, J. RFC 2328: OSPF Version 2 (1998). rfc-editor.org/rfc/rfc2328.
- Droms, R. RFC 2131: Dynamic Host Configuration Protocol (1997). rfc-editor.org/rfc/rfc2131.
- Deering, S. & Hinden, R. RFC 8200: Internet Protocol, Version 6 (IPv6) Specification (2017). rfc-editor.org/rfc/rfc8200.
- Narten, T. et al. RFC 4861: Neighbor Discovery for IP version 6 (IPv6) (2007). rfc-editor.org/rfc/rfc4861.
Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.