Exam Center · Practice Exam

Practice Exam 2

A second full-length practice exam of 56 questions, in the same four-part format as Exam 1 but with an entirely different set of question wording. Sit it timed at 120 minutes. If you scored well on Exam 1 through memory of its answers, this exam is the honest second opinion.

CCNA 200-301 v1.1 56 questions 120 minutes Verified 2026-10-11

How to sit this exam

Same rules as the real thing: a 120-minute limit, no notes, no second screen. Cisco does not publish an exact pass mark, but a score around 825/1000 has long been the reference. Aim for 85% or better here and treat anything under 80% as a prompt to revisit that domain's question bank.

Do not rush. With only 56 questions, the time allowance leaves room to check your work. Read every option before answering — the exam rewards the answer that is precisely correct, not merely plausible.

Exam tip — distractors Most wrong answers are true statements that answer a different question. Before you commit, re-read the stem: does it ask for the best, the first, the default, or the command? That single word usually separates two tempting options.

Part 1 — Network Fundamentals

Select the single best answer. Feedback appears immediately.

Practice Exam 2 · Part 1 — Fundamentals
  1. What is the correct Layer 4 name for the data unit produced by UDP?

    • Packet
    • Frame
    • Datagram
    • Bits

    UDP produces a datagram at Layer 4, while TCP produces a segment. Packets belong to Layer 3, frames to Layer 2, and bits to Layer 1.

  2. Which device stops a broadcast from crossing into another network?

    • Switch
    • Hub
    • Router
    • Repeater

    A router separates broadcast domains; it does not forward broadcasts between networks. Switches and hubs each form a single broadcast domain.

  3. In which topology is every device connected to a central device?

    • Mesh
    • Star
    • Ring
    • Bus

    A star has a central device (typically a switch) with every node attached to it. A full mesh connects every node to every other node.

  4. In classful addressing, to which class does 172.16.0.0 belong?

    • Class A
    • Class B
    • Class C
    • Class D

    Class B covers 128–191 in the first octet, so 172.16.0.0 is Class B. Class A is 1–126, Class C is 192–223, and Class D is multicast.

  5. Which range is reserved for IPv4 loopback?

    • 127.0.0.0/8
    • 169.254.0.0/16
    • 224.0.0.0/4
    • 10.0.0.0/8

    127.0.0.0/8 is loopback (localhost is 127.0.0.1). 169.254.0.0/16 is APIPA, 224.0.0.0/4 is multicast, and 10.0.0.0/8 is private.

  6. How many subnets are created by borrowing 3 host bits?

    • 3
    • 6
    • 8
    • 16

    Each borrowed bit doubles the subnet count: 23 = 8 subnets.

  7. Which of these is a unique local IPv6 address?

    • FE80::1
    • 2001:db8::1
    • FD00::1
    • FF02::1

    Unique local addresses fall in FC00::/7, which includes FD00::/8. FE80:: is link-local, 2001:db8:: is documentation global unicast, and FF02:: is multicast.

  8. Which Ethernet frame field is used to detect transmission errors?

    • Preamble
    • Frame Check Sequence (FCS)
    • Type/EtherType
    • Data/Payload

    The trailing FCS carries a CRC used to detect corruption. The preamble synchronises, and the EtherType identifies the upper-layer protocol.

  9. Which fibre type uses a larger core and is limited to shorter distances?

    • Single-mode fibre
    • Multimode fibre
    • Coaxial copper
    • Shielded twisted pair

    Multimode fibre has a wider core, allows multiple light paths, and is used over shorter runs. Single-mode has a narrow core and reaches much farther.

  10. Which statement about bandwidth and throughput is correct?

    • Throughput can never be lower than bandwidth
    • Throughput is the measured rate and never exceeds bandwidth
    • They are always identical
    • They are unrelated measurements

    Bandwidth is the theoretical maximum; throughput is what you actually measure and is lower once overhead, errors, and congestion are accounted for.

  11. Which is a valid IPv4 multicast MAC address?

    • 01:00:5E:xx:xx:xx
    • FF:FF:FF:FF:FF:FF
    • 00:00:0C:xx:xx:xx
    • 33:33:xx:xx:xx:xx

    IPv4 multicast maps to 01:00:5E followed by the low 23 bits of the group address. FF:FF:FF is broadcast, 00:00:0C is a Cisco OUI, and 33:33 is used for IPv6 multicast mapping.

  12. Which protocol resolves an IPv4 address into a MAC address on a LAN?

    • DNS
    • ARP
    • DHCP
    • ICMP

    ARP maps a known IPv4 address to a MAC address. DNS maps names to IP addresses, DHCP assigns addresses, and ICMP carries control and error messages.

  13. Which command shows active TCP connections and listening ports?

    • ping
    • tracert
    • netstat
    • arp

    netstat lists connections and listening ports. ping tests reachability, tracert traces a path, and arp shows the ARP cache.

  14. In which band are channels 1, 6, and 11 the non-overlapping set?

    • 5 GHz
    • 2.4 GHz
    • 6 GHz
    • 60 GHz

    In the 2.4 GHz band, channels 1, 6, and 11 do not overlap. The 5 GHz band has many more non-overlapping channels available.

  15. What is the role of a network interface card (NIC)?

    • Route packets between networks
    • Convert data into signals and hold the device MAC address
    • Filter traffic by security policy
    • Assign IP addresses dynamically

    The NIC connects a host to the medium, converts frames to signals, and carries the burned-in MAC address. Routing, filtering, and DHCP are other devices' jobs.

  16. How does a container differ from a virtual machine?

    • Containers share the host OS kernel; each VM includes its own full OS
    • Containers each need a hypervisor
    • VMs are lighter on resources than containers
    • They are functionally identical

    A container packages an application and its dependencies but shares the host kernel, while a VM runs a complete guest operating system on a hypervisor and is heavier.

Part 2 — Network Access

VLANs, trunking, discovery, EtherChannel, STP, and wireless.

Practice Exam 2 · Part 2 — Network Access
  1. Which VLANs form the normal range on a Cisco switch?

    • 0–1000
    • 1–1005
    • 1–4094
    • 1006–4094

    The normal range is 1–1005; the extended range is 1006–4094. The absolute VLAN range is 1–4094.

  2. Which VLAN is the default on a Cisco switch?

    • VLAN 0
    • VLAN 1
    • VLAN 100
    • VLAN 999

    VLAN 1 is the default VLAN and cannot be deleted; every port starts as a member of it.

  3. Which command converts a switch port from access to trunk mode?

    • switchport mode access
    • switchport mode trunk
    • switchport access vlan 10
    • no switchport

    switchport mode trunk enables trunking. no switchport makes the port a routed Layer 3 interface, not a trunk.

  4. Which VLAN numbers are reserved for legacy technologies on many switches?

    • 1–1005
    • 1002–1005
    • 1–4094
    • 1006–4094

    VLANs 1002–1005 are reserved for legacy Token Ring and FDDI defaults and cannot be used for normal traffic.

  5. Which DTP mode actively attempts to form a trunk?

    • dynamic auto
    • dynamic desirable
    • access
    • trunk with nonegotiate

    Dynamic desirable initiates trunking; dynamic auto only responds. Access mode never trunks, and nonegotiate disables DTP entirely.

  6. Which guard shuts down a PortFast port that receives a BPDU?

    • Root guard
    • BPDU guard
    • Loop guard
    • Port security

    BPDU guard err-disables a PortFast port that receives a BPDU, because an end-device port should never see one. Root guard protects the root election.

  7. Which STP port state learns MAC addresses but does not yet forward frames?

    • Blocking
    • Listening
    • Learning
    • Disabled

    In the learning state the port builds the MAC table but still does not forward. Listening neither forwards nor learns, and blocking only receives BPDUs.

  8. Which is a default STP timer value?

    • Hello time 1 second
    • Hello time 2 seconds
    • Max age 10 seconds
    • Forward delay 5 seconds

    STP defaults are hello 2 s, forward delay 15 s, and max age 20 s.

  9. The PAgP negotiation protocol belongs to which category?

    • Open standard
    • Cisco-proprietary
    • IEEE standard
    • IETF standard

    PAgP is Cisco-proprietary; LACP is the IEEE 802.3ad open standard for link aggregation.

  10. Which command verifies an EtherChannel bundle?

    • show etherchannel summary
    • show vlan
    • show cdp neighbors
    • show ip route

    show etherchannel summary reports the bundle protocol and member ports. The others show VLANs, neighbours, or routes.

  11. Which protocol propagates VLAN information to other switches in the same management domain?

    • VTP
    • DTP
    • STP
    • LLDP

    VTP (VLAN Trunking Protocol) synchronises the VLAN database. DTP negotiates trunking, STP prevents loops, and LLDP discovers neighbours.

  12. Which wireless security method is now considered obsolete and insecure?

    • WEP
    • WPA2
    • WPA3
    • SAE

    WEP's static RC4 keys are trivially broken and should never be used. WPA2 and WPA3 are the modern choices, with WPA3 using SAE.

  13. Which WLC deployment mode suits a small branch that wants traffic switched locally at the AP?

    • FlexConnect
    • Local
    • Sniffer
    • Monitor

    FlexConnect lets an AP switch client traffic locally if the WLC tunnel is unavailable, which suits branches. Local mode centralises traffic; sniffer and monitor are diagnostic modes.

  14. Which command generates the keys required to enable SSH on a Cisco router?

    • access-list 1 permit any
    • crypto key generate rsa
    • hostname R1
    • ip domain-name example.com

    crypto key generate rsa creates the RSA key pair SSH needs. Hostname and domain name must be set first, but generating the keys is the enabling step.

Part 3 — IP Connectivity

Routing tables, forwarding decisions, static routing, OSPFv2, and first hop redundancy.

Practice Exam 2 · Part 3 — IP Connectivity
  1. What is the administrative distance of EIGRP?

    • 90
    • 100
    • 110
    • 120

    EIGRP is 90, which is lower than OSPF (110) or RIP (120), so EIGRP is preferred when both learn the same prefix.

  2. What is the administrative distance of a directly connected route?

    • 0
    • 1
    • 90
    • 255

    Connected routes are the most trusted at AD 0; static routes are 1. AD 255 is a route that is never installed.

  3. In the output of show ip route, which code marks a directly connected network?

    • S
    • C
    • L
    • O

    C is the connected network; L is the local /32 address of the interface itself; S is static and O is OSPF.

  4. Which route acts as the gateway of last resort?

    • A /32 static route
    • The default route 0.0.0.0/0
    • An OSPF external route
    • A directly connected route

    The default route 0.0.0.0/0 matches everything and is used when no more specific route exists, so it becomes the gateway of last resort.

  5. Which route is a host route?

    • 10.0.0.0/8
    • 10.1.1.1/32
    • 0.0.0.0/0
    • 172.16.0.0/12

    A /32 mask matches a single host address, which is why 10.1.1.1/32 is a host route.

  6. Which OSPF neighbour state indicates a fully synchronised adjacency?

    • DOWN
    • INIT
    • 2-WAY
    • FULL

    FULL means the link-state databases are synchronised. 2-WAY is the normal steady state between DROther routers on a broadcast segment.

  7. On an OSPF point-to-point link, what is true about the designated router?

    • A DR and BDR are elected
    • No DR or BDR election occurs
    • Only a DR is elected
    • Only a BDR is elected

    Point-to-point networks form a direct adjacency with no DR/BDR election. DR and BDR are elected only on broadcast and non-broadcast multi-access segments.

  8. On a broadcast OSPF segment, which state do two DROther routers normally reach with each other?

    • FULL
    • 2-WAY
    • EXSTART
    • LOADING

    DROther routers stay in 2-WAY because they exchange routes through the DR and BDR rather than directly. They reach FULL with the DR and BDR.

  9. What is the default OSPF dead interval on a broadcast network?

    • 10 seconds
    • 20 seconds
    • 30 seconds
    • 40 seconds

    The hello interval is 10 s and the dead interval is four times that, 40 s, on broadcast and point-to-point links.

  10. Which command builds a floating static default route as a backup?

    • ip route 0.0.0.0 0.0.0.0 10.1.1.1 200
    • ip route 0.0.0.0 0.0.0.0 10.1.1.1 1
    • ip default-gateway 10.1.1.1
    • ip route connected 0.0.0.0

    The trailing 200 is a deliberately high administrative distance, so the route floats (stays out of the table) until the primary route fails.

  11. Which first hop redundancy protocol is an open standard?

    • HSRP
    • VRRP
    • GLBP
    • DTP

    VRRP is the IETF open standard. HSRP and GLBP are Cisco-proprietary, and DTP is a trunking protocol.

  12. Which FHRP supports up to four active forwarders for load sharing?

    • HSRP
    • VRRP
    • GLBP
    • OSPF

    GLBP (Gateway Load Balancing Protocol) can use up to four forwarders, each answering ARP for the shared virtual IP so client traffic is spread across gateways.

  13. What is the default priority in VRRP?

    • 1
    • 100
    • 110
    • 255

    VRRP defaults to priority 100, the same as HSRP, with the highest priority winning the master/active role.

  14. Which command starts an OSPF process and enters OSPF router configuration mode?

    • router ospf 1
    • ospf 1 area 0
    • network 0.0.0.0
    • ip ospf 1

    router ospf 1 enables OSPF process 1. Networks are then advertised with the network command inside that process.

Part 4 — IP Services, Security & Automation

NAT, DHCP, NTP, syslog, SNMP, QoS, ACLs, Layer 2 security, VPNs, and automation.

Practice Exam 2 · Part 4 — Services, Security, Automation
  1. Which statement describes static NAT?

    • A fixed one-to-one mapping between an inside and a public address
    • Many inside hosts sharing one public address
    • A translation that uses source ports to multiplex
    • A pool of addresses assigned on demand

    Static NAT maps one inside address permanently to one public address, which is useful for hosting a server. Many-to-one and port-based sharing describe PAT.

  2. Which command displays the current NAT translation table?

    • show ip nat translations
    • show ip route
    • show ip interface brief
    • show arp

    show ip nat translations lists inside local/global and outside local/global mappings. The other commands describe routing, interfaces, or the ARP cache.

  3. Which NTP stratum is a device directly attached to a reference clock?

    • Stratum 0
    • Stratum 1
    • Stratum 15
    • Stratum 16

    Stratum 0 is the reference clock itself; a server directly attached to it is stratum 1. Stratum 16 means unsynchronised.

  4. Which DHCP message does the server send in reply to a client's Discover?

    • Offer
    • Request
    • Acknowledge
    • Discover

    In DORA the server replies to Discover with an Offer; the client then sends Request and the server finishes with Acknowledge.

  5. Which syslog severity level number represents "informational"?

    • 0
    • 3
    • 6
    • 7

    Syslog levels run 0 emergency through 7 debugging; level 6 is informational and level 3 is error.

  6. What does SNMP use to describe managed objects in a structured way?

    • The Management Information Base (MIB)
    • An access control list
    • A DSCP value
    • A VLAN database

    The MIB is the hierarchical database of managed objects an SNMP agent exposes. ACLs, DSCP, and VLANs are unrelated.

  7. Which QoS action delays packets to smooth out bursts, rather than dropping them?

    • Policing
    • Shaping
    • Marking
    • Classification

    Shaping buffers excess traffic to slow it to a target rate, while policing drops or remarks excess traffic. Marking and classification happen earlier in the process.

  8. Which ACL number range identifies a standard numbered ACL?

    • 1–99
    • 100–199
    • 1300–1999
    • 2000–2699

    Standard ACLs use 1–99 and the expanded range 1300–1999. Extended ACLs use 100–199 and 2000–2699.

  9. Which command applies ACL 10 to an interface in the inbound direction?

    • ip access-group 10 in
    • access-list 10 in
    • ip access-class 10 in
    • acl 10 in

    ip access-group 10 in binds the named or numbered ACL to the interface. ip access-class restricts VTY line access, not interface traffic.

  10. Which threat does DHCP snooping primarily defend against?

    • A rogue DHCP server handing out false addresses
    • ARP spoofing between hosts
    • MAC address table flooding
    • A rogue STP root bridge

    DHCP snooping marks trusted ports and drops OFFER/ACK messages from untrusted ports, blocking a rogue server. ARP spoofing is DAI's target; flooding is port security's.

  11. Which VPN type permanently links two sites over an untrusted network?

    • Site-to-site IPsec VPN
    • Remote-access VPN
    • SSL web VPN
    • A client-based VPN

    A site-to-site IPsec tunnel connects two fixed gateways, typically to link branch and headquarters networks. Remote-access and SSL VPNs serve individual users.

  12. Which data format represents objects as key-value pairs using braces and is common in REST APIs?

    • XML
    • JSON
    • YAML
    • CSV

    JSON uses braces for objects and brackets for arrays, with key-value pairs. XML uses angle-bracket tags, and YAML uses indentation.

Review table

Use this table to route a missed question back to its domain and lesson.

QuestionsDomainWhere to revise
1–51.0 Network FundamentalsWeek 1 · Key Concepts; Week 3 · Reference Models
6–101.0 Network FundamentalsWeek 7 · Subnetting; Week 5 · Ethernet Frames; Week 6 · IPv6
11–161.0 Network FundamentalsWeek 5 · MAC and ARP; Week 4 · Wireless; Week 11 · Virtualization
17–242.0 Network AccessWeek 5 · VLAN, Trunking, DTP, STP
25–302.0 Network AccessWeek 5 · EtherChannel, VTP; Week 10 · Wireless Security; Week 4 · WLC
31–353.0 IP ConnectivityWeek 6 · Routing Table; Week 3 · Static Routing
36–403.0 IP ConnectivityWeek 6 · OSPFv2 fundamentals and configuration
41–443.0 IP ConnectivityWeek 6 · First Hop Redundancy Protocols
45–484.0 IP ServicesWeek 9 · NAT, DHCP, NTP
49–524.0 IP ServicesWeek 9 · Syslog, SNMP, QoS
53–555.0 Security FundamentalsWeek 10 · ACLs, Layer 2 Security, VPNs
566.0 Automation and ProgrammabilityWeek 12 · Data Formats: JSON, XML, YAML

Sources & references

  1. Cisco. CCNA Exam v1.1 (200-301) Exam Topics. learningcontent.cisco.com.
  2. Moy, J. RFC 2328: OSPF Version 2 (1998). rfc-editor.org/rfc/rfc2328.
  3. Droms, R. RFC 2131: Dynamic Host Configuration Protocol (1997). rfc-editor.org/rfc/rfc2131.
  4. Deering, S. & Hinden, R. RFC 8200: Internet Protocol, Version 6 (IPv6) Specification (2017). rfc-editor.org/rfc/rfc8200.
  5. Narten, T. et al. RFC 4861: Neighbor Discovery for IP version 6 (IPv6) (2007). rfc-editor.org/rfc/rfc4861.

Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201. Last content verification: 2026-10-11.