Exam Center · Coverage Map
CCNA 200-301 v1.1 Blueprint Coverage Map
The published exam topics are the contract for what can be tested. This page lists
every objective in domains 1.0 through 6.0 and links each one to the lesson or lab in this course
that teaches it — so you can prove, objective by objective, that nothing is left uncovered.
CCNA 200-301 v1.1
All six domains
Objective-level links
Verified 2026-10-11
On this page
Domain 1.0 — Network Fundamentals (20%)
Domain 2.0 — Network Access (20%)
Domain 3.0 — IP Connectivity (25%)
Domain 4.0 — IP Services (10%)
Domain 5.0 — Security Fundamentals (15%)
Domain 6.0 — Automation and Programmability (10%)
Revision checklist
Sources & references
The objective numbers and wording below follow the Cisco published CCNA Exam v1.1
(200-301) Exam Topics . Use the third column as a study router: when you cannot explain an
objective from memory, follow the link and re-read that lesson before moving on. The domain
weights matter — IP Connectivity alone is a quarter of the exam, so it earns the most
revision time.
Domain 1.0 — Network Fundamentals (20%)
Objective What it asks Where it is covered
1.1 Explain the role and function of network components: routers, Layer 2 and Layer 3 switches, next-generation firewalls and IPS, access points, controllers, endpoints, servers, and PoE.
Week 1 · Main Components of Network — Part 1 ; Part 2 ; Switches and Addressing
1.2 Describe characteristics of network topology architectures: two-tier, three-tier, spine-leaf, WAN, SOHO, and on-premises vs cloud.
Week 2 · Network Representations and Topologies ; Network Architectures ; Topology Comparison
1.3 Compare physical interface and cabling types: single-mode and multimode fibre, copper; Ethernet shared media vs point-to-point; PoE concepts.
Week 4 · Physical Layer ; Copper Cabling ; Fiber Optic ; Connection Types and PoE
1.4 Identify interface and cable issues: collisions, errors, and mismatch duplex and/or speed.
Week 4 · Interface and Cable Troubleshooting ; Week 5 · Ethernet Frames
1.5 Compare TCP to UDP.
Week 3 · TCP/IP Protocol ; Week 8 · TCP Functions ; UDP
1.6 Configure and verify IPv4 addressing and subnetting.
Week 1 · IPv4 Parts 1–3 ; Week 7 · Subnetting ; VLSM
1.7 Describe the need for private IPv4 addressing.
Week 6 · IPv4 Special Addresses — Part 1 ; Part 2
1.8 Configure and verify IPv6 addressing and prefix.
Week 6 · IPv6 Addressing and Format ; IPv6 Subnetting and Prefixes
1.9 Compare IPv6 address types: global unicast, unique local, link local, anycast, multicast, and modified EUI-64.
Week 6 · IPv6 Address Types ; SLAAC, NDP and DHCPv6
1.10 Verify IP parameters for the client OS (Windows, macOS, Linux).
Week 6 · Local and Remote Router §11 (Windows, macOS, Linux) ; Week 1 · IPv4 and Subnet Mask
1.11 Describe wireless principles: nonoverlapping Wi-Fi channels, SSID, RF, and encryption.
Week 4 · Wireless Media ; Wireless Architectures and WLC
1.12 Explain virtualization fundamentals: server virtualization, containers, and VRFs.
Week 11 · On-Premises vs Cloud Servers ; Introduction to Servers
1.13 Describe switching concepts: MAC learning and aging, frame flooding, and the MAC address table.
Week 5 · MAC Address Table ; How the Switch Processes Frames
Domain 2.0 — Network Access (20%)
Objective What it asks Where it is covered
2.1 Configure and verify VLANs (normal range) spanning multiple switches: access ports (data and voice), default VLAN, and inter-VLAN connectivity.
Week 5 · Switched Networks and VLANs ; VLAN Configuration and Access Ports ; Inter-VLAN Routing
2.2 Configure and verify interswitch connectivity: trunk ports, 802.1Q, and the native VLAN.
Week 5 · Trunking, 802.1Q and Native VLAN ; Lab: VLAN, Trunk and Inter-VLAN
2.3 Configure and verify Layer 2 discovery protocols: Cisco Discovery Protocol and LLDP.
Week 5 · CDP and LLDP
2.4 Configure and verify Layer 2/Layer 3 EtherChannel (LACP).
Week 5 · EtherChannel and LACP ; Lab: STP and EtherChannel
2.5 Interpret basic operations of Rapid PVST+ Spanning Tree: root port and root bridge, port states, PortFast, root guard, loop guard, BPDU filter, and BPDU guard.
Week 5 · STP Fundamentals ; Rapid PVST+
2.6 Describe Cisco wireless architectures and AP modes.
Week 4 · Wireless Architectures and WLC
2.7 Describe the physical infrastructure connections of WLAN components: AP, WLC, access/trunk ports, and LAG.
Week 4 · Wireless Architectures and WLC
2.8 Describe network device management access: Telnet, SSH, HTTP, HTTPS, console, TACACS+/RADIUS, and cloud-managed.
Week 5 · Device Management Access
2.9 Interpret the wireless LAN GUI configuration for client connectivity: WLAN creation, security settings, QoS profiles, and advanced settings.
Week 8 · Lab: Wireless Configuration
Domain 3.0 — IP Connectivity (25%)
Objective What it asks Where it is covered
3.1 Interpret the components of the routing table: routing protocol code, prefix, network mask, next hop, administrative distance, metric, and gateway of last resort.
Week 6 · Routing Table ; Week 3 · Static Routing
3.2 Determine how a router makes a forwarding decision by default: longest prefix match, administrative distance, and routing protocol metric.
Week 6 · The Forwarding Decision
3.3 Configure and verify IPv4 and IPv6 static routing: default route, network route, host route, and floating static.
Week 3 · Static Routing ; Week 6 · Static and Dynamic Routing ; IPv6 Static Routing
3.4 Configure and verify single area OSPFv2: neighbour adjacencies, point-to-point, broadcast (DR/BDR selection), and router ID.
Week 6 · OSPFv2 Fundamentals ; OSPFv2 Single-Area Configuration ; OSPF Network Types and Neighbors
3.5 Describe the purpose, functions, and concepts of first hop redundancy protocols.
Week 6 · First Hop Redundancy Protocols ; Lab: HSRP
Domain 4.0 — IP Services (10%)
Domain 5.0 — Security Fundamentals (15%)
Objective What it asks Where it is covered
5.1 Define key security concepts: threats, vulnerabilities, exploits, and mitigation techniques.
Week 10 · Network Attack Mitigations
5.2 Describe security program elements: user awareness, training, and physical access control.
Week 10 · Security Program and Wireless Security
5.3 Configure and verify device access control using local passwords.
Week 10 · Device Security
5.4 Describe security password policy elements: management, complexity, and alternatives such as multifactor authentication, certificates, and biometrics.
Week 10 · Password Policies and Authentication Alternatives
5.5 Describe IPsec remote access and site-to-site VPNs.
Week 10 · IPsec Site-to-Site VPNs
5.6 Configure and verify access control lists.
Week 10 · ACL Fundamentals ; Standard ACLs ; Extended ACLs ; ACL Placement
5.7 Configure and verify Layer 2 security features: DHCP snooping, dynamic ARP inspection, and port security.
Week 10 · Layer 2 Security Configuration ; Lab: Layer 2 Security
5.8 Compare authentication, authorization, and accounting concepts.
Week 10 · Triple-A Server
5.9 Describe wireless security protocols: WPA, WPA2, and WPA3.
Week 10 · Security Program and Wireless Security
5.10 Configure and verify WLAN within the GUI using WPA2 PSK.
Week 8 · Lab: Wireless Configuration
Domain 6.0 — Automation and Programmability (10%)
Revision checklist
Print this list or copy it into your notes. A tick means you can explain the idea out loud,
draw it, and configure it — not just recognise the words.
I can name the function of each network device and say whether it works at Layer 2 or Layer 3.
I can compare two-tier, three-tier, and spine-leaf designs, and say where SOHO and WAN fit.
I can choose copper vs fibre, single-mode vs multimode, and explain PoE.
I can diagnose a duplex mismatch versus a speed mismatch versus a cable fault.
I can state when TCP is right and when UDP is right, with examples.
I can subnet an address, find the network, broadcast, first, and last host without a calculator.
I can list the RFC 1918 private ranges and explain why NAT is needed.
I can compress and expand an IPv6 address, and identify each of its address types.
I can verify a host's IP parameters on Windows, macOS, and Linux.
I can explain non-overlapping Wi-Fi channels and the wireless security options.
I can explain MAC learning, ageing, flooding, and the MAC address table.
I can configure access and trunk ports, and explain the native VLAN and 802.1Q.
I can configure EtherChannel with LACP and verify it.
I can describe STP/Rapid PVST+ roles, states, and the guard features.
I can configure and verify static routes, including default, host, and floating static.
I can explain administrative distance, metric, and longest-prefix match.
I can configure single-area OSPFv2 and explain DR/BDR election and router ID.
I can explain HSRP, VRRP, and GLBP and their default priorities.
I can configure static NAT, NAT pools, and PAT overload.
I can configure NTP, syslog, SNMP, DHCP relay, and SSH.
I can classify, mark, and queue traffic with QoS and explain PHB.
I can write and place standard and extended ACLs correctly.
I can configure port security, DHCP snooping, and DAI.
I can compare WPA, WPA2, and WPA3.
I can explain automation, SDN, the planes, AI/ML, REST, Ansible/Terraform, and JSON.
Sources & references
← Previous Exam Center
Next → Practice Exam 1
Target exams: CCNA 200-301 v1.1 · CyberOps Associate 200-201.
Last content verification: 2026-10-11.